The water level Indicator employs a
simple mechanism to detect and indicate the water level in an overhead
tank. This is a five level indicator. The sensing is done by transmitter
and will be start sending radio signal that will be received by the
receiver. The receiver updates different levels LED depending upon the
water level signal transmitted by transmitter. (Five level). A buzzer is
also added which will automatically start as the water level becomes
full. The user has to press the button on receiver to stop the buzzer.
Installation of water level indicator is a very simple task. The task of
installation comprises of two parts, Receiver and Transmitter
Step 1: The power adapter is the ready-to-use kind, which can
be easily plugged into an outlet and other end of adapter can be easily
plugged into receiver.
Step 2: Switch on the power adapter after installation of transmitter.
Step 1: Insert two battery cell (AA) into transmitter and close it properly.
Step 2: The transmitter will be placed on water tank. It’s one side consists of a wire (antenna) that will always be kept in open.
Step 3: The other end consists of six different color wires
(sensing wires). Arrange the wires according to the height of the water
in the tank.
The arrangement of wires is as shown below:
i. Set the level of common sensor (Black) at the bot-tom of tank.
ii. Set the level of Brown wire at the 20% level of tank.
iii. Set the level of Red wire at the 40% level of tank.
iv. Set the level of Orange wire at the 60% level of tank.
v. Set the level of Yellow wire at the 80% level of tank.
vi. Set the level of Green wire at the 100% (Full) level of tank.
Step 4: All the six wires will immersed into overhead tank properly.
The water level Indicator will work efficiently in a multiple storey
building of five (5) floors. Installation of the receiver in open will
increase its efficiency.
i. Easy Installation.
ii. Long Transmitter battery life (min 365 days).
iii. Low maintenance, fully automatic and no hassle of wires.
iv. Compact elegant design and consume very little energy consumption.
v. It ensures no overflow there by saves electricity and water.
vi. Water proof transmitter.
Do’s and Don’ts
i. Clean the wires head in overhead tank at least once in 2-3 months for better reception.
ii. There is a single open wire attached to transmitter, this wire is
antenna for transmitter. This a fixed length wire. Do not cut it or join
it with other wire.