eBay

Please purchase the item according to the title and its part number

LCD EWP & FAN CONTROLLER - PART NO: 8000

The unique LCD EWP/Fan Digital Controller will manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature and manage control of your electric Thermatic Fan, No need for a separate thermal switch. The Controller varies the speed of your EWP looking for, and locking onto your target temp. If the engine temp goes 3 degrees C over the target, the Controller will run your radiator fan until the target temp is restored. And it now does 12 & 24 Volt.

KIT CONTENTS
ITEM	PART NUMBER	DESCRIPTION	QUANTITY
1	18000	EWP Digital Controller Assembly	1
2	8411	Wiring Harness (includes 10AMP fuse)	1
3	8415	Temp Sensor 1/4 NPT	1
4	0415	In-Line Adaptor	1
5	8512	Hose Clamps	2
6	0574	Ring Terminal	1
7	8510	Rubber Sleeves	2
8	0615	Velcro	2
9	18922	Instructions	1
10	8921	Sensor Instructions	1

Davies Craig Pty Ltd is very pleased to announce the arrival of the updated Liquid Crystal Display (LCD) EWP/Fan Digital Controller!

This LCD EWP/Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

These include:
?The prominent blue Liquid Crystal Display screen (pictured)
?Now suitable for all 12v & 24v electrical systems, with relevant displays
?Genuine Thermometer, with coolant and targeted/set temp. displays
?Diagnostic check & warm-up signals
?Nine (9) targeted/set coolant temperatures, 60C (140F) to 100C (212F)
?Flashing “EWP?logo signifying water pump in operation
?Davies Craig Thermatic Fan logo, circulating signifying fan in operation
?Flashing High & Low Voltage indicators
?Low & High Temp indicators
?Audible alarm -
* if coolant temp doesn’t exceed 40ºC (104ºF) within 5 mins of start-up
* when coolant temperature exceeds 10ºC (50ºF) of set/target
* when coolant temperature exceeds 100ºC (212ºF)
?Above Set/Target Temperature indicator accompanies audible alarm
?Temperature Sensor short & open circuit indicators
?Automatic time-out, EWP runs for 3 minutes or until engine temp has reduced to -10?C (-14F) below set/targeted temp whichever occurs first.

The updated Davies, Craig LCD EWP/Fan Digital Controller (#8000) as an engine management component has undergone extensive research, development, vehicle and test centre scrutiny.

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures, 60ºC (140°F) 65ºC (150°F) 70C (160°F) 75ºC (165°F) 80ºC (175°F) 85ºC (185°F) 90ºC (195°F) 95ºC (205°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

The LCD Digital Controller can be used with our EBP however it is not recommended as it will not vary the speed of the pump in response to temperature but rather simply turn the pump on and off once the top end temperature is reached. For a far more economical & appropriate solution, we would recommend Part Number 0401 & 0444 to turn the EBP on and off at your set temp.

*Note: This controller (Part No. 8000) is set up for negativley earthed systems however with a wiring adjustment, can also handle positive earthed systems.

please contact us if you have any question!

[24 hours]

PAYMENT and SHIPPING -

PayPal and Bank deposit are the preferred method of payment

Items are shipped BY AUSTRALIA POST express or fastway couries -

please contact us for quote

Please make payment within 3 - 7 business DAYS After that period, a unpaid item dispute will be filed

Shipping TIME - - NSW , QLD = 1-2 days VIC , ACT = 2 - 2.5 days SA , WA = 2.5 - 3 days TAS , NT = 2.5 - 3 days The Shipping cost is Inc POSTAGE COST+Packaging charge + Handling charge

Dedication to Customer Service Your 100% satisfaction is our GOAL - we will do the BEST to make customers are 100% satisfied Please make sure that the part you ordered fits before altering or final installation Altered items and custom orders are not refundable or returnable Please inspect the parts immediately after receiving your order for any problems acquired during shipping A exchange can be made if you receive the wrong

Please read the following carefully for any Return & Exchange questions:

Absolutely no return or exchange after 14 days, be sure to inspect your package when it arrives. We must be notifying within 10 days of receipt if an item is damaged or not delivered. After 10 days we will only accept returns due to fitment or defects issues.

Damaged:	Must be notifying within 10 days, please email us and describe damages to the item and packaging materials as well. We may also ask to provide pictures to help expedite the claim process. We will explain how to claim on insurance for damaged during shipping items
Non receipt:	Must be notifying within 10 days. It is buyer responsible to track packages and ensure safe arrival. If package show delivered but buyer had not received we will contact EMS and wait for investigation. If buyer provided incorrect address, we will try to contact carrier but not guarantee replacement
Received Wrong product:	Must notify within 10 days. Please check to see if product looks similar to pictures showed on ebay then contact us either by phone of by email. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you.
Bad address:	If shows delivered we will try to retrieve package no guarantee. If package is return due to bad address buyer is responsible for shipping charges again.
Defects and Fitments issues:	Notify within 10 days. We recommend profession help if you encounter problems. Please check auction description to match your vehicle year make and model. We may ask to provide pictures to show issues then determine if we will accept the return .