- Description
-
A PROFESSIONAL DEVICE FOR DAILY USE
Excellent quality by fully digital inverter technology!
The plasma cutter CUT 50 has the most advanced MOSFET inverter technology (Toshiba).The resulting special properties such as high speed and precision of control give the devices their excellent quality when cutting.
The CUT 50 is for industry, crafts and private gardening optimally suited. In the last 10 years, more than 30000 STAHLWERK plasma devices were used in different work situations..Easy use, stability and accuracy guarantee a cutting at the highest level.
The device comes complete operational. You need only connect the compressor. The compressor is not included. The power connector is installed by us. All you need is a 16C fuse.
Consulting - Service - Instruction - Help
Service is a top priority. Each customer has his own personal account manager, who support the customer in the execution of his appointment or assist him for questions and advice. The customer is served during and after the warranty period from us. In case of problems, call us, we are always available. You are also welcome to visit us. Our motivated team will always find a positive solution for you. Take advantage from our services. Everyone is welcome to test our equipment in detail under the guidance of our experts.
STAHLWERK
PREMIUM QUALITY FOR PROFESSIONALS
- Features
-
ALL SIGNIFICANT WELDING PARAMETERS IN DIRECT ACCESS
-
Switch on the hand grip (similar models work with cable ties).
-
Digital display
- Cutting power up to 12 mm, depending on material: construction steel ST37 to 12 mm, V2A to 8 mm, Aluminium up to 7-8 mm. These are real data (look at the video).
-
The device works at a high frequency ignition in contact with the workpiece, (advantage: more precise and faster cutting)
In our shop you will find devices with up to 30 mm cutting power. For example:
-
-
-
Small cutting width
-
High cutting speed
-
Good cutting quality
-
By the small deformation thin sheets can immediately be re-welded together
-
Accurate and very stable arc. Perfect for cutting oil tanks, tubs, chassis or similar body. (Good alternative to disc grinder)
The inverter technology also allows an enormous weight and volume reduction both the transformer as well the balance resistance. Thus, it is possible to develop a device that weighs only 9 kg.
With the CUT 50, you can easily cut all conductive metals such as standard steel, copper, stainless steel, brass, aluminum, titanium, etc. Infinite adjustability of the cutting current of 10-50 A. An air compressor with at least 4.5 bar is required. (No more expensive gas). A commercial compressor is enough.
To work with this device, you need only:
STAHLWERK
PREMIUM QUALITY FOR PROFESSIONALS
- Technical Data
-
Power Vol. |
AC 230 V |
Input frequency |
50/60 Hz |
Duty cycle at 50 A |
60% |
Duty cycle at 30 A |
100% |
Display of output current
|
10 - 50 A |
Fuse |
16 C |
Housing shielding grade |
IP21 |
Cutting strength
|
12 mm
|
Cutting width |
1,2 mm |
Barometric pressure |
4,5 bar |
Air flow |
mind. 80 L/min |
Arc deflection |
contact ignition |
Weight |
8,3 kg |
Dimensions L x W x H (mm) |
498 x 325 x 300 (without handle) |
|
- Scope of delivery
-
- The device PLASMA CUT 50.
- Profi Plasma torch package AG-60 4,5 m. (Please when purchasing of Plasma accessories take care that the device, the plasma tube package CUT-60 included!).
- Plasma accessories: 5 nozzles, 5 electrodes, 2 ceramic caps.
- Ground wire 3 m.
- Water separator with manometer.
- Connection hose: 0,5 m and 3 m.
- User guide
- Invoice including VAT.