FREE FREE FREE DCAN K+DCAN K CAN KCAN D-CAN BMW Cable BMW Faults BMW fault codes BMW Key Programming BMW Interface BMW Diagnostic BMW OBD BMW Service Reset GT1, BMW Diagnostic tool, BMW USB interface, BMW Diagnostics, BMW INPA, BMW DIS, BMW OBD2, BMW DIS, BMW Coding BMW NCS EXPERT INPA DIS v44 DIS v57 GT1 SSS PROGMAN NAVCODER BMW TOOLS OBD OBD2 OBD2 FREE FREE FREE
BMW USB Diagnostics Cable and Software Package
(Dealer Level Diagnostic Software with unique 1 click easy install software)
NOTE: This Cable
works on BMW Cars from 1995 - 2007. For Compatable cable for later
cars please see our other auctions.
This Cable and Software set allows full Coding , Programming and Diagnostics for your BMW. This package contains everything you need to communciate to
your BMW, as a dealer would in a workshop but allow you to do it using your
own laptop and saving you on expensive dealer diagnostic fees.
Did
you know - If your BMW was built after 2005 the chances are that if you get
your car battery replaced you will need it coding to your car which means
taking it to a dealer to get this done. This tool will allow you
to do this yourself and is just one of the many examples of how this cable
will save you money and avoiding costly visits with dealers and specialists.
This package will diagnose faults and tell you how to carry out the necessary repairs. This package also includes a our unique 1 click installer package which automates the installation process from start to finish so you dont have to follow a complicated and lengthy installation guide (often 60+ pages). Everything you need to get up and running is included with this set. This cable set uses the latest quality chipset and also comes with the latest drivers. It plugs in directly into your USB port for simplicity and ease of use.
Comes with the latest versions of INPA (v5.0.6) , EDIABAS (v7.3.0) , DIS / GT1 (v57) , SSS / PROGMAN (v32) , NCS EXPERT (v4.0.1) , NAVCODER (trial) + Much more
This same software is used by Dealers and BMW Specialist's to diagnose faults, programming, coding etc. Why pay dealer prices when you can do this yourself. The cable allows the auto detection of the vehicles ECU fitted and allows the full programming of vehicle functions that require ignition on/off as well as other functions.
NOTE: Do not confuse this this cable with other cheap and standard generic OBDII code readers or EML 327 type code readers. They will read generic fault codes but not BMW specific codes (specific for each BMW car). This cable will allow to read BMW specific codes as well as coding, programming and much much more.
All leads are fully tested before shipping and come with everything that is required. No extra or hidden interfaces it comes with everything required.
Why pay dealer prices when you can do this yourself and saving you £££s.
What you get:
1x BMW USB Cable
2x Software DVDs (with unique 1 click easy install software)
Why buy from BMCABLES.COM?
1. Unique 1 Click Easy install Software - Our software has a unique 1 click easy install software application. Gone are the days where you have to spend hours or days setting up the software following a complicated setup guide. No more messing about with registry settings, windows paths etc. This is a fully automated installation. If you have done your research then you know how problematic it can be setting it up manually. With our software it is fully automated from start to finish.
2. Compatable with 64bit systems and Windows 8.1 - 64 bit operating systems are the future. Our product works on both 32bit and 64bit windows platforms. Other sellers will claim that TIS or NCSexpert are 32bit only. On ours we have developed a version which works in both 32bit and 64bit environments. This works on Windows XP, Windows Vista, Windows 7, Windows 8
& Windows 8.1 (both 32bit & 64bit )
3. Most upto date Versions of diagnostic software - You get the very latest versions of software. For example INPA 5.0.6, EDIABAS 7.3.0, NCS expert 4.0.1, WinKPF 5.3.1, Toolset32 4.0.3, DIS, SSS v32. Compare this with outdated versions other from other sellers.
4. Highest Quality Cable - This cable uses the latest quality chipset and has built in surge protection which other similar cables do not have. Do take chances with your car and laptop with other modified inferior cables.
5. Latest Daten/Data
Files - Comes with the latest data/setting files as well as
workshop manuals to help troubleshoot your BMW.
Using the software provided the cable will give you the following features:
● Fault Code Reading / Resetting
● Auto Identify your vehicle number, Chassis, ECU etc
● Coding of New
Battery to your BMW
● Code / Program modules
● Service Light Resetting
● Annual Inspection Reset
● Read / Clear / Reset Air bag Light codes
● Read / Clear / Reset ABS Light codes
● Apply Firmware & Software updates to your BMW
● ABS Wheel Speed Sensor checking
● Real Time Diagnosis and Display Data
● Full Diagnostics
● Test specific parts
● Live Data Checking
● Creation of Test Plans for Repairs/Upgrades/Updates
● EWS DMW Synchronisation
● Apply Firmware & Software updates to your BMW
● Read/Clear/Reset Fault codes and faults
● Programming of vehicle functions (inc retrofitting of items)
● Coding of vehicle functions
● Monitor information
● Key Memory and Personalising
● Key Matching and Remote Control Programming
● Car Memory Setup Features
● Reset Adaptations
● Individual Values
● Alignment
● Activation
● Module Version
● Reset SMG / SSG Functions
+ Many more features
Cable and software works will all versions of Windows including Windows XP, Windows Vista, Windows 7, Windows 8
and Windows 8.1 (both 32bit and 64bit versions). It can be installed on
Apple Mac using apple bootcamp.
This Cable will connect to all modules in your BMW and has been fully tested with following programs (supplied)
● INPA (v5.0.6)
● Ediabas (v7.3.0)
● DIS
● SSS Progman (v32)
● NCS Expert (v4.0.1)
● WinKFP (v5.3.1)
● Toolset32 (v4.0.3)
● TIS (latest version)
● Navcoder (trial)
+ many other programs
Minimum Hardware Requirements
● Intel or AMD 1.6Ghz or faster processor
● 1Gb Ram (2Gb or more
recommended)
● 40Gb of Harddisk Space if installing everything or 2Gb if
installing the main programs INPA/NCS Expert/WinKFP etc.
● USB Port
Please note that VMWare which is required
for DIS and SSS Progman requires a 64bit processor. Most computers
built after 2004 have 64bit processors in with the exception of some low
power processors such as Intel Atom or some low end AMD processors.
This cable is suitable for the following cars
● BMW 1 Series E87
● BMW 3 Series E36, E46, E83 & E90
● BMW 5 Series E39, E60 & E61
BMW 6 Series E63, E64
● BMW 7 Series E38, E65 & E66
● BMW 8 Series E52
● BMW X5 Series E53 & E83
BMW Z Models E85 & E52
● Mini R50, R52 & R53
+ Other BMW Models
Note: We cannot guarantee that you will be able to access every module and/or use every piece of software. Compatability varies due to variations in the cars modue versions or availabilty of data files for the modules, rather then issues with our product.
Older BMW cars have an old style round (20pin) diagnostics plug for this you will need to purchase an adapter (20pin to 16pin adapter) to allow this to plug into your car. We sell these separately or as a combined bundle. Please see our other ebay listings.
Important: This will work for BMW cars from 1991 to 2007. This will not work on some cars built from
late 2007 and newer cars (from when BMW started using D-can for OBD communication)
Use INPA to View Live Data, Reat and Reset Fault Codes, Reset Car Adaptations, Activate Sensors/Functions, Read/Reset Service Information, View if Cylinders are running rough as well as access the cars 30+ modules (Engine, Transmission, Body and Communications) and more..
Use DIS for Diagnostic, Coding and programming, Exvercise Components, Reset Service Interal Lights, Retrofit and install modules, View Data, Read & Reset Fault Codes, Reset Car adaptions, Check car components and run planned test and much more...
Use SSS Progman for programming, coding and personalisation of your car. Program delay lights, daytime running lights. Update the firmware of modules with the latest versions etc.
● Cables are normally dispatched within 24 hours of receiving payment.
● All UK orders are dispatched via Royal mail Recorded signed for delivery (tracked).
● All International Orders (Orders outside of the UK) are sent via first class post with proof of postage obtained for every item posted from Royal Mail.
● It is the responsibility of the Buyer (Recipient) to submit and make a claim with Royal mail (the postage carriers) in the unlikely event of an item arriving not arriving (lost in post) or arriving damaged. Before any claim is submitted for lost items Royal Mail state that up to 25 working days are to be allowed to pass before any claim is made (Royal mail postal claim terms). We (the sender) will provide proof of posting along with all the necessary information required to the Buyer (Recipient) to allow them to submit a claim to Royal mail. By purchasing this cable you are agreeing to this condition.
● Returns only accepted if cable is faulty.
● Postage and packaging cost includes postage, package, material and other functional cost.
● Auction is for the BMW cable listed. We do not provide any support or any other services outside of this listing.
● We accept most safe payment methods including PayPal.
● Payment must be made within 7 days of purchase.
By making a purchase you are accepting the the terms and conditions listed above.
FREE FREE FREE BMW Cable BMW Faults
DCAN K+DCAN K CAN KCAN D-CAN BMW fault codes BMW Key Programming BMW Interface BMW Diagnostic BMW OBD BMW Service Reset GT1, BMW Diagnostic tool, BMW USB interface, BMW Diagnostics, BMW INPA, BMW DIS, BMW OBD2, BMW DIS, BMW Coding BMW NCS EXPERT INPA DIS v44 DIS v57 GT1 SSS PROGMAN NAVCODER BMW TOOLS OBD OBD2 OBD2 FREE FREE FREE
