Recovery Kit Includes:
* Heavy Duty Ultrasonic Cleaning Machine
* Custom Made DX4 Template (for 2 Heads) or
DX5 Template (for 1 Head)
* Recovery Solutions #1- #4
* Storage/Disposal Bottle
* 2 Syringes & Connection Tubing
* Solution Cups & Parts Tray
* Foam Tip Swabs or Lint Free Cloths
* Safety Goggles
* Latex Gloves
* Storage Container
* Instruction Manual
Supported Printers:
* Roland Versacamm & Soljet Printers
* Mimaki JV3, JV4 & JV5 Printers
* Mutoh Rockhopper II/III, Spitfire, Blizzard & RJ8000
* Mutoh Valuejet
* Epson DX4 Printers
You may Fix/Repair your printer by cleaning the print head.
This is a complete recovery and Maintenance kit. It has been successfully used to recover partially clogged printheads and completely dry, sitting in the drawer for a year printheads. It's not guaranteed to recover every printhead, but it will save many heads you would normally throw away.
Recommended Uses:
1. Regular maintenance for printheads. If you use your printer once in awhile, you will probably get ink buildup inside the printhead which will eventually clog the head or cause nozzle deflections. If you use your printer constantly, you will probably get some buildup on the inside of the head and more buildup on the outside which you need to remove from time to time to keep your printer from leaving messy droplets and streaks on your prints.
2. Printhead recovery of wet heads. When your printhead is clogged and you need to be in production, you can recovery your printhead quickly and efficiently. This kit can recover your printhead in hours or overnight.
3. Printhead recovery of dry heads. If you have an old head that is collecting dust in the corner, you can use this kit to recover it. You problably still have one because it cost you a lot of money to replace. Many people keep their old printheads because they can't bring themselves to throw away something that costs as much as a laptop computer. Dry printheads may take up to 5 days to recover, but that's one head you will not have to buy. However, if your head had electrical problems there is an 80% chance the recovered head will not work.
Common Questions:
Q: How many printheads can I recover with this kit?
A: We have included storage bottles for the soaking solutions so you can reuse them several times. You can probably recover 10-15 printheads before buying replacement solution bottles.
Q: Is it difficult to recover a printhead?
A: We provide a manual that gives you step by step instructions on recovering your printhead. We also have additional instructions if your printhead doesn't recover easily.
Q: Can I recover Dampers Too?
A: Uh, no. Please don't do that! Dampers are very sensitive. They have a mesh filter which is important to filter out small particles. Forcing liquid through them is very bad.
Q: What about the filter inside of the printhead cap?
A: The recovery solutions should break down the particles and clean out the filter. However, we will be selling replacement caps so you can change them if you wish.
Q: Can I damage my printhead by recovering it myself.
A: Yes! We try to minimize this possibility by including precise instructions on how to recover your printhead. If you are not careful you may damage your printhead.
Q: Do you offer a guarantee that I will recover my printhead?
A: No. We are unable to assess your level of abilities. We can say that we have many people who have successfully recovered their printheads. We do offer a 30 day return policy on our machine. If after 30 days you are not satified with the recovery kit, you may return it to us for a refund on the amount paid. Return shipping and Outside of Continental U.S. shipping charges not included. We also offer 90 days parts and labor on our recovery machine.
Q: Can you tell me how to remove my printhead and reinstall it?
A: As is our standard policy, we can't. If you don't feel confortable removing your printheads or don't feel you can reassemble everything properly, please don't attempt to do it.
