eBay

Replacement Aluminium Brazing Rods

5 off - 18" (46cm) HTS-2000 Brazing Rods.   Weight: 60g approx.

Note that they are 18" rods (equivalent to 10 x 9" rods).  A lot of other Aluminium brazing kits and rods on the market only have 9" rods in them.

Similar to Durafix Easyweld ,ALUMALOY, DURAFIX, ALADDIN, HTS 2000, ALUMAWELD, ALUMAROD, WIZARDWELD

Kits are also available which include 5 Rods (18"), Tinning Brush, DVD and Instruction Leaflet. 

Extra Rods are available in either 5, 10 or 25 off quantities (18" rods).

 Check out my other items!

 

Anyone Can Repair Aluminum and Cast Quickly and Easily with

HTS-2000 Brazing Rods

The Strongest, Fastest, and Easiest Parts Repair in the World.

This new repair technology performs well on aluminum, cast aluminum, pot metal, copper, magnesium, and all white or porous metals. You can easily repair corroded or oil-impregnated areas that can be next to impossible to fix using welding machines with aluminum welding rods or other brazing products.

Repair Any Part Stronger than New in Minutes-Without a Welding Machine

  • Repair aluminum cracks in engine blocks, wheels, and aluminum heads.
  • Repair holes in bell housings, oil pans, and radiators.
  • Repair leaks in aluminum boat, fuel tanks, condensers, and A/C lines with ease.
  • Thread repair is easy in transmission housings, alternators, and generators.
  • Recast a section or refabricate an aluminum ear only using our material and a heat source.

HTS-2000 brazing rods are used to repair diesel engine, automotive, truck, tractor, aviation, motorcycle, aluminum boats, awnings, gutters, ladders, aluminum rivets, brackets or for complete fabrication. Customers will tell you that our material is the strongest, fastest, and easiest repair for all metals available anywhere.

Yes, HTS-2000 works on all non-ferrous alloys including "all" aluminum alloys (even the ones that cannot be welded), magnesium aluminum mixtures, zinc, die cast, pot metal, copper, bronze, Nickel, Titanium and galvanized parts.

Easiest, Fastest, and Strongest Repair for Aluminum and Cast Parts

The preferred choice of professional welders, maintenance repairmen, fabricators, our brazing rods also are preferred by machine shops and repair shops that at one time ordered welding supplies, like Tig welding machines, heli-arc machines, and welding rods.

Why use weaker repairs, like silver solder for A/C lines, or JB weld a high-strength glue for leaks on a transmission? Our materials repair stronger than new - not just seal. Our material is stronger than alumiweld, alumalloy or any of the old brazing rods.

Machine and Repair Shops will tell you that after trying all other products to repair Aluminum and Cast, ours are the only products they use and trust.


 

HTS-2000 Second Generation Fluxless Brazing Rod

Used with nothing more than a heat source, such as propane or oxy-acetylene!

Through recent advancements in metallurgy, HTS-2000 is found to be the easiest, fastest, and strongest brazing rod ever to be developed! Made for all non-ferrous metals and aluminum parts, HTS-2000 is a second generation Industrial Strength Brazing Rod created from a revolutionary new formula.

Not to be confused with Alumaloy, Alumaweld, Alumarod, Durafix, Aladdin 3 in 1, or any other first generation rods most of them consisting of 3 alloys. HTS-2000 is a unique stand-alone product, Comprised of nine alloys that cost more to produce and through exhaustive testing led to this superior advanced technology. HTS-2000 has an elongation of 10% in 2 inches (rather than the standard 3% like the first generation rods listed above) which makes HTS-2000 3 times more flexible and stronger than any of its competitors. It also easily penetrates past impurities that lay below the metal's surface which may be impossible to penetrate with competitors materials. Also unlike the first generation rods HTS-2000 does not require steel or special cleaning brushes. All of this means not only a more expensive manufacturing process with new technology but also superior quality (this is the best brazing rod you can buy anywhere at any price) direct to the customer, see our testimonials and video and it will be easy for you to choose HTS-2000 as your #1 choice

The results are unquestionable. The repairs are stronger than new.

  • Requires No Flux. Metal-to-Metal Bond. 100% Metal Alloy.
  • Stronger than the Base Metal - up to 45,900 PSI.
  • Low Temperature. Between 717 and 737 Degrees Working Temperature.
  • Over 500 Degrees Below Melt Point of Aluminum.
  • Use Any Heat Source, such as propane, butane, mapp, or an oxy-acetylene torch.
  • Stores Safely and Indefinitely. Simple - Versatile - Portable.
  • Brazes all Aluminum Alloys, including zinc, magnesium, pot metal, and cast.

HTS-2000 is a "Second Generation" fluxless low-heat brazing rod for nonferrous metals. HTS-2000 will successfully join all aluminum alloys, including those that are not favorably joined by high-temperature brazing.

When drawn over heated aluminum, HTS-2000 penetrates the aluminum oxide, creating a molecular bond that is stronger than the original commercial aluminum. Electrochemical corrosion is never a problem, because the electrode potential between HTS-2000 and aluminum is so slight. HTS-2000 joints last permanently in normal or protected environments. They will endure 10 years or longer under severe conditions. HTS-2000 joints are evaluated as permanent, corrosion resistant, and stronger than joints made by heli-arc machines and all other brazing rods tested.

 

PHYSICAL PROPERTIES

Tensile: 45,900 PSI

Elongation: 10% in 2 inches

Impact: 43 Ft. lbs (charpy)

Shear: 31,000 PSI

Melting Point: 717 - 737 °F (381 - 392 °C)

Therm. Exp.: 15.2 x 10- 6in./in./F°

Elec. Cond: 26 (% of copper std.)

S.P. Grav.: 6.6

Weight: 0.24 lbs/cu. in.

Rockwell:  48

{Meets military spec: R-4208}

 

Instructions for using HTS—2000

Step 1:
Clean the area to be worked with a file, grinder, or wire brush. This "2nd Generation" brazing rod does not require a special brush to make it work!

Step 2:
Heat the work surface (not the brazing rod) until the work surface is hot enough to melt the rod, just as you would if using a solder. DO NOT PUT THE ROD IN THE FLAME. You must bring the temperature of the base metal up to the melting point of the HTS—2000 Fluxless Brazing Rod. Open the pores of the work surface with heat for the rod to penetrate the surface.

Step 3:
For threads and thin aluminum, tin the housing with the rod itself by scratching on the housing when the appropriate temperature is reached. For all other uses, use the tinning brush (included) to tin the area with HTS—2000, when the appropriate temperature is reached. Then do your build up for excellent results.

Step 4:
When the repair is completed, always allow to cool naturally. Propane works well on most weights up to 1/4 inch, between 1/2 and 1/3rd inch or parts over 12 inches use mapp gas it comes in a yellow cannister for $3.00 more and is 200 degrees hotter. On heavier work or to save time, you can use oxygen acetylene. Always use a Rosebud tip or a neutral flame with oxygen acetylene. Do not put the rod in the direct flame while brazing with HTS—2000.

 

 

UK Postage:

All items which are posted without recorded delivery are posted by normal post and a "Certificate of Posting" is obtained.  In the rare event that the item is lost in the post, the purchaser will be responsible for making a claim for loss in the postal system.

I will provide all the necessary information to make this claim including the Certificate of Posting.  Claims can only be made after 15 working days (c. 3 weeks) have elapsed.  If you wish to avoid this rare, but potential problem, please select the Recorded Delivery option when checking out.