eBay
 
  BMW INPA / Ediabas K+DCAN USB Interface
Product Specification :
     
 

This Interface allows full diagnostic of BMW's build from 1998 - 2010

Works with INPA, SSS, Progman and others.
(All functions as in Omitec Interface)

The smallest, best looking & highest quality of it's kind.

Functions:
- Read & erase errors
- Adaptations
- Coding
- And others...

Models that require D-CAN:
- E60, E61 after 3/2007
- E83 after 9/2006
- E81, E87 after 3/2007
- E90, E91, E92, E93 after 3/2007
- E70 (New X5)
- R56 (New Mini)
- And others...

Features:
- Connects to USB (built in 1,5m long USB Cable, creates virtual comport)
- Double K-Line support (See Screenshot)
- High Speed D-CAN and PT-CAN support (500 kbit/s) (See Screenshot)
- Low Speed PT-CAN support (100 kbit/s)
- Battery voltage detection by control line (See Screenshot)
- Ignition voltage detection by control line

Package contains:
INPA / Ediabas K+DCAN USB Interface - 1 

F.A.Q:
Q: I have an older BMW with OBD2 Connector (16 pin) which uses K-Line - will this Interface work?
A: Yes this interface will also work on older OBD2 BMW's using K-Line, however there is a cheaper option for you - please check our other auctions.

Q: I have an rather new BMW with OBD2 Connector which uses D-CAN can't I use a simple (cheap) Interface?
A: No, you need a interface which supports D-CAN such as the one offered in this auction, there is no K-Line available in the new cars anymore so you will not be able to communicate with the car using a K-Line only based Interface.

Q: How does this Interface work?
A: It's setup as a STD:OBD2 Interface and translates all commands / traffic to and from the D-CAN Bus.

Q: I have seen other auctions from other vendors for a higher / lower price, what's the difference ?
A: Usually the price and the quality - Since our Interfaces are assembled and tested to the highest quality standards, It's up to you (the customer) to compare price, product and terms and make your decision according to that.

Q: I have an very old BMW that have an 20pin OBD1 connector under the hood, can I use this interface?
A: Basically - yes, however you would need an OBD2 16pin female to OBD1 20pin adaptercable and certain cars would even require a real RS232 ADS Interface to gain access to all modules - given all that we do NOT recommend using this interface on OBD1 20 pin vehicles.

Q: How much is the shipping to my destination?
A: Worldwide shipping by Airmail is FREE of charge, however if you require courier service such as DHL there will be a surcharge depedning on the weight and your destination.

If you did not find an answer to your product related question - please feel free to contact us and we will reply you as soon as possible to the extend of our knowledge.

Limited stock ! "first come, first served"
 
     
 
http://osefactory.com/EBAY/INPA_DCAN2/interface_ready.JPG
http://osefactory.com/EBAY/INPA_DCAN2/interface_ready2.jpg
Screenshot showing Ignition Status feedback
http://osefactory.com/EBAY/INPA_DCAN2/ign.JPG
Screenshot showing K-Line Access to a EDC16 ECU from a E60/E61
http://osefactory.com/EBAY/INPA_DCAN2/identification.JPG
EDC16 ECU from a E60/E61 for testing (this ECU is NOT part of the auction and is only shown as reference)
http://osefactory.com/EBAY/INPA_DCAN2/ecu_ready.jpg
Screenshot showing an D-CAN (500kbit/s) access to the ECU (Using external CANBUS sniffing tool)
http://osefactory.com/EBAY/INPA_DCAN2/canscan.jpg
This picture below is useful for people with the latest BMW models which got Ethernet available on the OBD2 plug, BMW uses pin8 to enable this Ethernet connection, unfortunately this pin is (was) also used as 2nd K-Line for a couple of older BMW models, we do connect the K-Line to pin8 as well to be fully backward compatible to those older models, if you have such a new model with Ethernet and experience "communication disturbed" as soon as the diagnostic begins we advice you to remove pin8 by soldering it out.
( Interfaces shipped from now on will have pin8 removed already, in case you need the
backward compatibility for older K-Line equipped cars that have some modules connected to pin8 we offer an adapter for that - just contact us and ask for details  )
http://www.osefactory.com/EBAY/INPA_DCAN2/pin8.JPG
 
*** Commercial terms / China factory direct
 

STORE POLICY:
1. In order to prevent from any commercial problem potentially, please kindly check our terms & condition below, if the buyer do not agree, please do not bid.
2. The shipping charge is included the packing materials.
3. All items we sell are 100% brand new
4. All price are the fixed price, no negotiable
5. We reserve the rights to refuse the order from the eBay member who has the feedback to be zero, negative or non-registered
6. We reserve the rights to make the final decisions in the event of any dispute
7. NO Software is included besides the drivers required and / or special configuration tools

PAYMENT:
1. Accept only paypal payment
2. Price not include the import duty of the buyer's country nor VAT
3. If pay by eCheck, we process the shipment only after transacted the eCheck

SHIPMENT:
1. Free shipment of sending by international priority air parcel
2. Please specify also your shipment address in the remark field of paypal payment procedure
3. The buyer can also request to send by DHL or EMS, the extra shipment cost USD25.00 is needed, with such option, the shipment can arrive the buyer's destination within 1 week
4. All order would process within 2 working days after received the paypal payment
5. We do not accept the PO Box address, the address must be deliverable
6. If multi-items purchase & send by air parcel, it counts only 1 shipment charge.
7. For the secure reason, we do not allow the change of the shipment address advised via email
8. the shipment origin is from China

 

RETURNING & WARRANTY
1. If the item(s) is/are damaged due to the shipment, we would exchange the new one for the buyer after received the returning item(s) with brand new condition.
our returning address:
=========================
Henry
Poseidon Technology Ltd.
Address: Room 1501, 15/F., Jubilee Centre, 18, Fenwick Road, Wanchai, Hong Kong. 999077
Tel: +852-36125816, Fax: +852-81674076

=========================
2. If the item(s) is/are defected or not matched as description, it needs to contact us for the returning within 7 days upon the receiving of the shipment.
3. We offer 6 months warranty for our products from the day of buying
4. The accidental damaged from the mis-using of the customer are not included in our warranty

CONTACT:
1. Contact us via ebay only, we do not reply other communication option(s).
2. We provide also wholesale service, we request the wholesales quantity to be a specific single item purchase up to 10 pieces.

LEGAL:
1. All the brands & logos displayed in that page are for reference only, they are the property of their respective owners
2. All items are the third-party option where we sell based on our modification on the hardware interface design & own manufacturing from China, we are not responsible for any illegal using of the copy software with our hardware interfaces

PRODUCT KEYWORDS:
car diagnostic, auto diagnostic, car diagnostics, auto diagnostics, automotive diagnostic, automotive diagnostics, automotive scan tool, auto scan tool, automotive diagnostic tools, car diagnostic tool, auto diagnostic tools, auto diagnostic tool, automotive diagnostic tool, car diagnostic tools, car scan tool, vehicle diagnostic tools, vehicle diagnostic tool, vehicle diagnostic, OBD2