Here's an attractive, durable and verstile mount for your flat panel display. The tilt and slide mechanism with screw and lever locks almost has a "steam punk" look to it. The device is recommended for screens up to 30" and 66 lbs. The mount is made from steel and has a nice powder coat finish.
The mount allows you to tilt the display up and down about 35 degrees off center max. You can swivel it side to side up to 50 degrees off center max. And, it will retract down to a depth of 3.25" when parallel and even to the wall and extend out to a maximum of about 5.75".
It will support any display within the weight limit that has a VESA 75, 100, 200 or 200x100 compliant mounting pattern. (VESA 75 is a square hole pattern where each hole is about 3" apart vertically and horizontally. VESA 100 has holes that are about 4" apart. VESA 200 are about 8" apart. VESA 200x100 are about 8" apart horizontally and 4" apart vertically).
IMPORTANT! Please note that the screen sizes listed are only approximations. The VESA pattern used to mount the display and the weight of the display are the primary indicators of whether a given display and mount are compatible. Please check the VESA pattern listed in your product manual to ensure that this mount will work with your display.
Adjustable Tilt & Swivel Wall Mount Bracket for LCD LED (Max 66Lbs, 10~32inch) - BLACK |
|
| PID | SPECIFICATIONS | 4566 | Model # | LCD-601M BLACK | Type | LCD Wall mount | Minimum VESA | 75 x 75 | Maximum VESA | 200 x 100 | Maximum Weight | 66 lbs | Minimum Req. Display Size | 10" | Maximum Req. Display Size | 30" | Minimum Extension | 3.25" | Maximum Extension | 5.75" | Tilt Range | 30 degrees | Swivel Range | 60 degrees | Construction | Steel | Color | Black | Wall Plate Dimensions | 5.1"X2.7" | Front Plate Dimensions | 8.7"x8.7" | Built In Level | NO | Cable Management | NO | Notes: | | | |
Mounting Hardware Included: 4 lag bolts and 4 optional concrete anchors. Machine screws for mounting to panel are not included. |