This Listing is for
|
Respirator/Gas Mask Inhalator / Vapouriser Assembly
+
Choice of end fitting
|
|
This listing is for:
- 1x Respirator / Gas Mask Inhalator / Vapouriser
Assembly
Description:
Connect this to your gas mask filter port, as you inhale (breathe in) you will
draw air through the liquid in the bottle (that's what the tube into the bottle
is for), vaporising the air you breathe.
The more liquid you have in the bottle the harder it
is to drawer air through the liquid.
Label may be slightly different than the picture
Bottle size is 1.0L
Although not a complicated item in
it's features this is one which has been missing from the market.
How does it work?
-
You fill the bottle with your
chosen liquid to the level you desire
-
Screw the hose assembly on
-
Connect to your mask or
respirator
-
Put your mask on and breath away
enjoying the odours
-
Your choice of end fitting
FITTINGS: |
NONE
|
NONE:
No fitting supplied -22 Standard Medical Sized Ferruled
End.
Open/Ferruled end - Approx 21mm ID 30mm OD Un-stretched
|
|
MALE PLAIN:
NATO40 / GOST40
Thread Type: 40mm x 1/7" to BS EN 148-1:1999
Standard Filter Port compatible thread the same as is on
a standard filter.
Compatible with GP5, GP7, S6, S10 S12 filter port
etc.......
|
|
FEMALE PLAIN:
NATO40 / GOST40
Thread Type: 40mm x 1/7" to BS EN 148-1:1999
Standard Filter compatible thread the same as is on a
standard filter port.
Compatible with GP5, GP7, S6, S10 S12 filters etc.......
|
|
MALE BLACK:
- As MALE PLAIN but stripped and chemically coated Black
NATO40 / GOST40
Thread Type: 40mm x 1/7" to BS EN 148-1:1999
Standard Filter Port compatible thread the same as is on
a standard filter.
Compatible with GP5, GP7, S6, S10 S12 filter port
etc.......
|
|
FEMALE BLACK: -
As FEMALE PLAIN but stripped and chemically coated Black
NATO40 / GOST40
Thread Type: 40mm x 1/7" to BS EN 148-1:1999
Standard Filter compatible thread the same as is on a
standard filter port.
Compatible with GP5, GP7, S6, S10 S12 filters etc.......
|
|
STRAIGHT LARGE:
Approx 26.5mm OD / 23mm ID
or Approx 26.5mm OD / 18.0mm ID
Compatible with standard gas mask hoses without
fittings, can also be used as a push fit type fitting in a T-Piece, Y-Piece,
Cross, 90deg with no fitting
|
|
STRAIGHT SMALL:
Approx 21.5mm OD / 18.0mm ID
Compatible with Genuine Anaesthesia hoses, Masks and
Rebreather bags with a Standard -22 Size end.
|
Fittings are shown in the images above
attached to a standard respirator hose, this IS NOT included in the sale.
Confused? Not sure what you want/need,
Please Ask
|
|
|
|
DISCLAIMER
These items are sold as novelty display piece items, we cannot be held
responsible for their misuse
|
|
|