MARCHESINI Forged Aluminum Wheel M7RS Genesi SUZUKI GSX1300R HAYABUSA

■Product Description:

Color:Anodized Gold


•EURO Yen Reduction Campaign!


Currently the yen's appreciation of the exchange rate continues, with certain conditions stipulated
A special price (fixed price discount) as "return campaign to customers"
We will provide products.

Do not miss this opportunity!

•Implementation Condition
We will implement campaign within the range that satisfies the following A/B conditions.
The campaign ends when either A/B is out of condition.

[A]
When the exchange rate is within "1 euro = 130 yen"
*The exchange rate value refers to "YAHOO! FX rate of JAPAN finance (euro/yen) ".
*The judgment of the exchange rate value is based on judgment of the total import agency wheel technology.

[B]
The implementation period will be up to the end of August 2017.
*We will end the campaign in case the A condition is not satisfied even within the implementation period.
*We may consider whether to continue the campaign if we satisfy the A condition even at the end of the implementation period

•Special price (price discount) applicable content
During the campaign period, we will offer a fixed amount of discount from the selling price.
The corresponding products (wheel type) are listed below.

[25, 000 yen discount from list price (tax excluded)]
M7RS Genesi Wheel Set
M10S Kompe-Evo Wheel Set
M10S Motard Wheel Set

[15, 000 yen discount from fixed price (tax excluded)]
M10RS Kompe (TA3) Wheel Set

*Wheel set purchase is eligible.
*The magnesium wheels will be excluded.
*In the Webike, the campaign price minus the regular price is displayed as regular price during the campaign period.

For further details please visit the Total Import AgencyWheel Technology HP.


•Product Specification
Front Rim Size: 3.50-17
Rear Rim Size: 6.00-17
Material: Forged Aluminum (Al) AA6009/T1
Production Method: Forging Process (Forged)
Included Parts: Aluminum Air Valve (L (90-degrees) Specification)


•It is usable for Racing.
It adopts NEW ring type/damper system.
•JWL Standard Corresponding Product
A new performance aiming at the apex of AluminumWheel has joined Marchesini's Lineup.
Acting in MotoGP "M7R (Magnesium wheel) "The innovative full-featured design and Direct ReplicaMODEL inherited the latest Forged Aluminum Wheel ...

"M7Rs Genesi"

This Wheel retains the qualities as a Racing wheel, durability � High performance Road Go Ing, pursuing optimum Balance for elements such as reliability � It is Wheel..
At the same time as Riding's pleasure, due to the texture provided by the unique Design born out of the top priority design, the look of Motorcycle will change to an attractive one beyond imagination.

? Detailed Product Specifications ?
[Production method]
[Forged Manufacturing Forged]
� Hot forging
� Dedicated Gold type adopted (Exclusive Mold)
� Multidirectional simultaneous PRESS forging (Total Formed Forging System)
� 15000t class forged PRESS
� CNC (Computer control) Final shape cutting finish by

?Design?
[7 Spoke]
Adopted Racing wheelDesign for Direct.

?Basic structure?
[Hub]
Front � Both Rear "Boring Cutting Process (Image 6)" Adopted hollow one piece structure.
* Front wheel "discAttachment structure (image 7 : No Left-discAttachment / Right-discAttachment Yes) "Spec. there is.
* Rear wheel "DiscAttachment structure (image 8)" I am adopting.

[Spoke]
Basic Forme (cross sectional shape design � Lightweight processing process) adopted MotoGPMODEL as Direct.

[Rim]
MT type Tubeless structure.
* For adaptation to purpose of use, STREET / Design contents are slightly different in RACING.

?Damper system?
New Ring Type-Damper System Adopted (Image 9).
Newly designed Damper system which is light weight and durability.

?Related Parts?
Parts constituting Wheel are mainly A 7075 series (Ultra Duralumin) Adopted.
It is made by CNC cutting finish.
Pursuit of design that sticks to functional beauty at the same time realizing both weight reduction and reliability.
Surface treatment is Anodized Finishing.

?Painting?
Adopt high quality Urethane paint finish with excellent durability.

[AnodizedMODEL]
Set Anodized FinishingMODEL using characteristics of Aluminum Material.

?Safety standard?
It is a product that cleared the safety level based on the JWL standard.

[Country of manufacture]
Italy (MADE IN ITALY)

?Manufacturer manufacturing?
Brembo S. p. A.
Via Brembo. 25 24035 CURNO (BG) Italy

	[Forged : Forged Currently manufactured Marchesini wheel (*1) Made from Magnesium � Aluminum together "Forging recipe" It is being created by. Forging is an old blacksmith (Kajiya) The origin of the technique, the contour desired for Gold genus (shape) Hammer from each direction until becoming (= Train) I will tell you how to make a product. Wheel's forging process compresses the high temperature state Gold genus with high pressure PRESS "Blank material (* 2)" Its principle and purpose are the same. A representative feature of the forged product is by following this process "Improvement of properties of Gold genus (strength, elongation rate, etc.)" In the case of Wheel, it can be said that it is a manufacturing method that can make Large expectations for weight reduction and improvement in safety. The basic performance of the forged product from the technical point of view is determined by the grain size and the heat treatment state in the Gold family. However, originally, the largest Large Merit obtained by forging occurs in the Gold genus "MFD (Metal Flow Direction = Gold Flow)" There is a difference depending on the utilization level of this property forged quality. Understanding the MFD characteristics and making use of it to the maximum Large limit is the best way to complete an ideal forged product and it becomes an essential condition. (*1) Target Wheel for AfterMarket Wheel. Excluding OEMWheel for vehicle Manufacturer. (*2) Cutting after compression molding Material that can be said to be the prototype of the forged product before finishing.
	? Cross section of forged Gold genus Image By forging, the crystal grain size in the Gold texture increases and various properties of Gold genus (strength � Growth rate etc.) will improve. Level of grain size is the ability of forged PRESS (pressure) Depends on. In addition, forged goods have characteristics that Gold texture is aligned in the direction deformed by compression, and in the genus Tissue, MFD of Image like plant fiber and wood grain is produced, and general In general, the genus Characteristics shows the maximum Large value in the direction perpendicular to the direction of MFD. As a result, creating a forged product that gives ideal MFD characteristics for parts called Wheel is the key to performance improvement.
	? Multidirectional Simultaneous PRESS Forging Method (Total Formed Forging System) Marchesini is a dedicated forged Gold type for producing high quality forged products utilizing the MFD characteristics to the maximum Large limit (Exclusive Mold) We are forging with a PRESS facility capable of compressing from multiple directions using. By adopting this system, the performance of each part of Wheel � Although it can improve reliability, the most effective part among them is to improve the performance of Rim part. Basic load acting on Rim (impact � Load) is input almost at right angle from the road surface, but by this forging method MFD showing the maximum Large value with respect to the input direction is formed in the Rim part, so weight saving and reliability (durability) Can be balanced at a high level.
	?Construction : Structure Wheel for AfterMarket provided by Marchesini, not only for Racing wheel but also for For Street Wheel Designed with top priority on pursuing "High performance" � Development is underway. Here Rear wheel (M10R Corse) Explanation of each part with reference to CutMODEL of. ? Hub part Designing the inner diameter of the hub as large as possible makes it Point. Its basic reason is that designing the inner diameter of the hub to be large makes it possible to improve the rigidity of the hub and shorten the length of the Spoke, which makes it possible to achieve both light weight and high rigidity. Marchesini's design philosophy regarding the hub structure which can be said as the whole foundation of the Wheel is consistent and the inside of the hub is troublesome even in the current forged Wheel where final finishing is performed by CNC cutting "Boring processing" By applying lightweight � Large diameter high rigidity hollow one piece structure is finished. ? Spoke part Spokes are pillars to support the rim, which results in a difference in weight and rigidity of the rim. Basically, as the number of spokes increases, it can be said that it is advantageous for reducing the weight of the rim, but the reason for this is simply that the distance between the spokes can be shortened. However, simply designing a large number of spokes increases the mass of the spokes themselves, which is a negative factor in improving the performance of the wheel. Therefore, while aiming at weight reduction of the rim, design including rigidity balance of the whole wheel etc. is required, but Marchesini faces directly against this condition and knows that difficulty level of cutting and cost will rise We are pursuing spoke design and cross section structure to give top priority to performance. ? Rim section For high-performance wheels, the rim part has rotational inertial weight (Moment) It is the part that we want to achieve the lightest weight to reduce. Although its effect is particularly effective for a motorcycle vehicle, weight reduction of the rim is strong � durability (safety) From the standpoint of a very careful design is required. The current Marchesini Wheel reduces the weight of the rim by pursuing a comprehensive balance with the hub and the spoke, and at the same time, the ideal MFD (Metal Flow Direction = metal flow) We have established a rim structure that combines strength and lightness by adopting our own forging manufacturing method that can form. ●Fitting parts SprocketHolder � discAttachment � Each part making up Wheel such as Side color is Duralumin Material (A 7075 / A2017) are manufactured by CNC cutting processing. We are pursuing weight reduction and functional beauty with commitment also in the design of related parts.

*The exclusive sprocket is sold separately.
*It is a possibility that the shape of the hub is different depending on the vehicle because the product on the photo is a spoke shape photo.
*Each color on the photo #5 is for reference. The color of the wheel may appear different from the actual color due to shooting and display screen setting.


SD21830208

Part Brand:

MARCHESINI

Manufacturer Part Number:

AS710.714AGC

Make:

SUZUKI

Model:

GSX1300R HAYABUSA

Warranty:

Yes