HERE WE HAVE FOR SALE A SET OF 8 X  RECON DENSO PETROL FUEL INJECTORS FOR LEXUS SC400 WITH 1UZFE ENGINE

A POPULAR UPGRADE FOR THE LEXUS LS400

PLEASE ENSURE YOU MATCH THE PART NUMBER AND VISUALLY MATCH THE ITEM IN THE PHOTO WITH YOUR ORIGINAL TO ENSURE FITMENT BEFORE BUYING.

spec:

251cc/min @3 bar , 13.8 ohms, high impedance

PART NUMBER: DENSO 23250-50020

PLEASE NOTE YOU WILL RECEIVE THE FULL SET OF 8 INJECTORS

 

• Injector Coil is Tested
• physically examined for damages
• Injector exterior is chemically cleaned and hand washed before testing
• The dynamic Ultrasonic cleaning process including submersive pulsation breaks up deposits  
• a leak test is performed
• Spray pattern and flow are tested and checked using state of the art ASNU flow testing equiptment  
• filter baskets are emptied and cleaned
• if the injector body is constructed from a  metal core casing, which often corrodes, then it is machined to remove any grime and rust and re-coated heat resistant gloss black to stop any further decay. however if the injector is of a later design and manufactured with a plastic core body casing, it is cleaned to remove any dirt deposits, and lubricated (however, please note that the absorbant properties of the plastics do allow some staining, which can not be removed. so please inspect the photo to ensure you are happy with the condition of the specific injector set you are purchasing) 
• o rings, washers, and pintle caps are checked, cleaned, re-fitted and replaced if damaged.

  Injectors are zip-sealed in air tight bags, and bodies lubricated for storage
•  packaged for immediate dispatch

 

It is common that after 50,000 miles of use a set of injectors will have a + or - 6% flow rate imbalance, causing both lost power and fuel efficiency.  Furthermore, a 5 micron build-up of dirt is common after 120,000 miles - which may be causing as much as a 25% reduction in flow rate, and a heavily distorted flow pattern which inevitably reduces your engines performance reducing bhp and fuel economy. 

so go ahead and upgrade those tired injectors!

PLEASE NOTE THAT BOXES AND END CAPS ARE FOR SCALE AND ILLUSTRATIVE PURPOSES ONLY AND ARE NOT INCLUDED IN THE SALE. THEY HAVE BEEN SUITABLY RE-PACKED READY FOR SHIPPING.