Choice of one of the following:
- 1 x 4CH (Latch) Receiver + 4CH Remote (single/pair)
- 1 x 4CH (Toggle) Receiver + 4CH Remote (single/pair)
- 1 x 4CH (Momentary) Receiver + 4CH Remote (single/pair)
- Extra 4CH Remote

(Please note, you will only receive the item listed in the dropdown menu above.  If an option is not present then the item is not currently available)

Brand new & high quality.
Lightweight, portable, easy to install and use.

4CH Remote:
Channels: 4
Frequency: 433mhz
Transmission Distance: 20-200M+ (open area, ideal distance)
(stretch the antenna in order to achieve effective distance)
Size: 60 x 39 x 14mm approx (plus keyring and antennae)
Weight: 28g

4CH Receiver Switch:
Power: DC 12V
Static current: ≤ 10mA
Relay load: 10A, 28DC/250AC ; 12A 125AC
Dimensions: 75 × 55 × 29mm
Weight: 79g
Operating temperature: -10 ℃ ~ +50 ℃

Latch type: Press the button, the relay is on till you press another one. Just like the wind-speed buttons of electronic-fan, press a wind-speed button, the fan runs at a certain speed until you press another button.

Toggle type: Press the button, the relay is on until you press it again. Just like the power key of TV remote controller, when you press it, TV on, press again, TV off. 

Momentary type: Press the button, the relay is on until you release it. Just like the button of Klaxon, if you press it, Klaxon on, and will turn off once you release it.

We will supply a receiver set to the control type you order.
Any control type can be set using the internal jumper.

These units can be used for starting and stopping, or the connection and break of the devices and electrical machinery.
The product could also achieve the requirements of various kinds of special control procedures.

Ideal use in:
Vehicle central locking systems
Garage doors
Electronic gates
TV, Motors, Fans, Cameras, Video Signals, Audio Signals, Electric Doors/ Locks/ Windows/ Curtains and more.


Each device connected will need to be powered by it's own power source.  If using 12v devices they can be wired in parallel with the switch power supply.

Instructions are available to download here