Listing is for a single Nichia NDB7875 445nm 22mm Blue Laser Module. Unit is in a 22mm aluminum module with 510 threaded adapter. It is prewired with a 2.4A X-Drvie bucking laser driver and comes with a high pass single element 405-G-2 glass lens. With the 510 threading the unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just connect to 510 threaded 6-9V power supply like a Mechanical mod with two Li-ions. Check out these links. The DTR le-adapter V1 510 Threaded Modules Input voltage range is 6V-9V from a 2A+ capable source and varying voltage between 3V-6V you can modulate the output power. Here is what you get. The X-Drive is encased in the module connected to the diode and the G-2 lens on the front adjusts the beam by turning the focus cap at the top. Connector assignment is: Wavelength 445nm +/- 5nm Input Voltage 6V-8.4V Driver Output Current 2400mA Driver Current Draw 1.7A +/- 0.5A Power Output 2.4W-3W Driver Type Constant Current Lens M9x0.5mm Threaded 405-G-2 Reverse Polarity Protection Yes Duty Cycle 120 seconds on 30 seconds off with proper heatsinking If you are looking for a host here are some of the more popular host/heatsink kits that will work with these diodes and if you want something that is not listed in those links that I show in my tutorials below shoot me a message and I can point you in the right direction for them.;) Nichia NDB7875 9mm 445nm Laser Diode Here is one of my favorite hosts. The Sirius 1-C Here is a list of tutorials I have made and experiments that can help give you ideas for your next project. International First Class mail "Not Tracked" Delivery estimate is 10-30 business days most falling around 15. or Express 5-7 day Tracked with Delivery Confirmation.(Recommended) |