This is a SWR Analyzer for ham hobbists. Frequency Generation & Control: 1 - 60 Mhz Source impedance: 50 Ohms Stability: +/- 100 ppm Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz Usable Measurement Range:SWR: 1.0 to 9.99 Impedance: approx. 5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) Power supply: Powerd by External: 12 to 15 Volts DC, 500mA Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down" Switch: "Power On" Connectors: RF USB: Mini-B receptacle External power: 2.1mm Power Jack (center pin positive) Applications: Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance Measure feedpoint impedance Measure ground loss Adjust antenna tuners and determine loss Measure inductors and capacitors Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance) Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance Determine characteristic impedance of transmission line Determine length of ? and ? wave phasing lines Coaxial Cable Loss Determine antenna tuner loss Measure balun loss Measure inductor Q Estimate quartz crystal parameters Measure magnetic loop resonance and SWR Operation button definitions: Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance BAND: select band from any of the available bands: 160M to 6M CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna CAN(up): increase frequency and used to cancel operation for CONFIG menu VAL(down): decrease frequency and used to validate operation for CONFIG menu
1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio
PAYMENT
We Only Accept Paypal on Ebay. For specific requirements, please feel free to contact us.
SHIPPING
Shipping:
Packages are sent from overseas, please expect lengthy custom delays if you choose to use default shipping service. Shipping to some countries is slow. That depends on your local postal service.
Most orders to USA take about7-20 daysusing epacket(USPS first-class service with tracking#).
Shipping to mostother countriestakes about10-30 daysvia Economy Int'l Airmailwithouttracking#. In rare case, it can take up to 40 days. It depends on your location and local postal service(e.g., Russian Postal service is slow), as well asthe weather conditionalong the shipping.
We don't take responsibility if you submit wrong address.
Here's an approx delivery time to some countries:
Please contact us if you need a tracking# or express shipping service.
TERMS OF SALE
If you are facing with troubles below, please contact us as soon as you can
Defective or Wrong: full refund or send you a new replacement
Missing: new package arranged, or partial refund
Dislike: full refund after we received your item (buyer undertakes return shipping fee)
ABOUT US
Our working time is 08:30-17:30 from Monday to Friday in Beijing Time. Because of the time difference, we may not reply your email immediately. All emails will be replied in 24 hours, please understand that. We devote to making the best service for you. We look forward to serving you. Any questions, please contact us via our ebay email. Your emails are warmly welcomed.
CONTACT US
Consumers' satisfaction is our first priority and pursuit. We promise to solve your problem in a good way. We consider neutraland negativefeedbacks as a SHAME. So please never give us a neutral or negative feedback beforecommunicating with us.