Here is what you get. A single brand new diode with long clean pins. These diode are not harvested from anything they are direct from the manufacturer.
Diodes are sensitive and should not be run or soldered until pressed in a module/heatsink. Diodes are current hungry and as they heat up their internal resistance is lowered causing them to want to draw more current. Don't attempt to connect the diode directly to a fixed voltage source like a battery. You must use a "constant current" power source like a current limiting driver or variable current power supply with the current limited to no more than 800mA or you diode will suffer thermal runaway and die. For more info on the reason for a constant current driver see this thread.
Diodes are tested to be in working order and packaged in an antistatic bag. Please use ESD precautions and short your driver leads discharging any capacitors before hooking up your driver to the diode.
Please note
These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction.
If you are looking for a host here are some of the more popular host/heatsink kits that will work with these diodes and if you want something that is not listed in those links that I show in my tutorials below shoot me a message and I can point you in the right direction for them.;)
Shipping is Free in the US
International
$10+$5 for each additional item for First Class mail "Not Tracked"
Delivery estimate is 10-30 business days most falling around 15.
or
$35 for Express 5-7 day Tracked with Delivery Confirmation.(Recommended)