POWABYKE SHOPPER CITY BIKE CONTROLLER WST-K3603 FROM BIKES AND BATTERYS LIMITED UNIT G LAMMAS COURT LAMMAS ROAD CORBY NN17 5EZ PHONE 07913740055 Powabyke shopper controller connections below. Four pin connector for the power in and out. Three pin connector for the pedal sensor. Six pin connector for the throttle (can be used with a three wire throttle red black and green) Five pin connector for the brake cutout and pedal assist and pure power mode. The controller will work with a three wire throttle but was made to work with a six wire throttle which has three lights fitted to indicate the battery level. ALL CONTROLLERS ARE FULLY TESTED PRIOR TO DISPATCH IF YOU ARE REPLACING A FAULTY UNIT MAKE SURE YOU HAVE IDENTIFIED AND REPAIRED THE CAUSE OF THE INITIAL FAILURE SO YOU DO NOT DAMAGE THE NEW BOARD WHEN IT IS FITTED. |