Each item is described to the best of our ability We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying & What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However,Should This Not Be Possible Or Practical Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives !!! Notice ; This Has Been ,Inspected And Tested For It's Function Only ...We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation ,Operation & Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details & Specifications; (1) Pre-Owned/Used 10 Ton Bateman Bantam Model 2538P Iron Worker Electrical - 115 Volts ,1Ph,60Hz Machine Capacity; 2"x2"x1/4" Angles 3/4" Rounds 3/4" squares 1/4"x4" Flats Cap Rails 2"x1/2"x1/8" Channels Punch 1/2" Round hole thru 1/4" mild steel Shut Height 3-11/16" Overall Size - 28" L x 28" W x 59"H Estimated Weight - 750 Lbs +/- This One Runs Great,Presently Set Up with Flat & Angle Blades ....Also Includes Custom Outboard Table/Rig To Cut 45Deg Angles Using 1-1/4" / 1-1/2" Angle Iron Note To All Potential Buyers; Machine works Fine ;However, Safe Guards Are Missing Buyer Must Replace & Make sure Machine Meets Any And All Local State & Federal Safety Requirements !!! Thanks For Looking ~Davis Machinery LLC
|