Fastener/hardware kit for a Reprap Prusa i3 single plate frame 3D printer.  This kit includes fasteners for a variety of various Prusa i3 builds.  The kit is comprised of zinc plated nuts and washers and black oxide socket head cap and grub screws.  As there can be variations between builds this is a general assortment that that is used on the Prusa i3 single plate frame 3D printers I have built.  The counts are based on using a hinged/accessible extruder (a Greg's Wade's) though will work for other extruder types as well.  If you are not sure if this kit is the right kit for your application contact me and I'll assist in choosing the right assortment for your build.  This kit includes M3-.8 x 35 mm socket head cap screws for the X and Y axis idler bearings.  Most builds use 623ZZ bearings due to the size of the printed bearing guides but some use 624ZZ bearings.  If your build uses 624ZZ bearings you'll need M4 fasters.  Contact me if that is the case and I will see what I can do.  

Ships free in US.  Check out my ebay store for other Reprap frame, rod, bearing and hardware kits.

Includes...

12 x M10-1.50 nut, zinc

12 x M10 flat washer, zinc

34 x M8-1.25 nut, zinc

34 x M8 flat washer, zinc

4 x M5-0.8 nut, zinc

50 x M3-0.5 nut, zinc

50 x M3 flat washer, zinc

12 x M3-0.5 nyloc nut, zinc

24 x M3-0.5 x 10mm socket head cap screw, black oxide

10 x M3-0.5 x 15mm socket head cap screw, black oxide

16 x M3-0.5 x 20mm socket head cap screw, black oxide

5 x M3-0.5 x 35mm socket head cap screw, black oxide

3 x M3-0.5 x 40mm socket head cap screw, black oxide

3 x M3-0.5 x 8mm socket head set screw, black oxide

1 x M8-1.25 x 20mm socket head set screw, black oxide