This remote control enables wireless remote shutter release. It can be used for self-portraits or reduce blur when using slower shutter speeds. Can lower camera shake.
For first time use, please pull out the plastic separator at the battery holder Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
Aim the transmitter in the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and press the shutter-release button on the remote control (when using remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).
How the camera focuses and shoots depends on the option selected for your camera's custom setting. For further information, check you camera's manual.
Infrared can't be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.
CARE AND STORAGE: When the remote control is not in use for an extend period of time, please remove the battery from the remote control. Do not leave the remote control in any place exposed to excessive heat, or humidity.
SPECIFICATIONS:
Size: 2.5" x 0.25" ( 6.35cm x 0.66cm )
100% Compatible with other infrared remote controls
Works with all remote shutter release control modes