10C Continuing Discharge Rate
4pcs 38120 Li-FePO4 12V 10AH LiFePo4 Power Battery Cell
With DIY Screw Terminal
Single Cell Technology parameter
|
No. |
Item |
Specification | |
|
3-1 |
normal capacity |
10000mAh ( | |
|
3-2 |
normal voltage |
3.2V | |
|
3-3 |
Inter impedance |
≤10mΩ | |
|
3-4 |
Maximum Charge Current |
3C（30A） | |
|
3-5 |
Maximum Charge Voltage |
3.65±0.05V | |
|
3-6 |
Maximum Discharge Current |
10C（100A） | |
|
3-7 |
Discharge stop voltage |
2.0V | |
|
3-8 |
Dimension |
Diameter |
38± |
|
Height |
122 ± | ||
|
3-9 |
Weight |
Approx. 350g | |
|
3-10 |
Work temperature |
Charge |
0~ |
|
Cischarge |
-20~ | ||
|
3-11 |
Store temperature |
In one month |
-20~ |
|
In sit month |
-20~ | ||
*The battery in condition of half full charge or the voltage about 3.2-3.3V.
- Nominal Capacity 10AH @1C discharge rate
- Operating Voltage 2.5V-3.65V LiFepO4 / Li-ion battery,
- Dimensions diameter of 38 (mm) height of 120~146 (mm)
- R 1.8 Max continuous discharge 5C
- Max pulse discharge 15C
- Dimensions diameter of 38 (mm) height of 146 (mm)
- Weight 350g per cell
Battery with DIY Screw Ends and package including below assembling components!
Connecting plates:
Fixing modules:
4S (5pins) & 2S (3pins) Balance plug - 1pcs each:
*How to assemble the batteries:
*How to connect the Balance connector:
If you dont have PCB / BMS / PCM and LiFePO4 Charger, you could use such as iMax B6, A6 or other Balance charger that support "LiFePO4" Battery type to charge the pack. Balance connector with one pin connecting to Postive pole, one pin to Negative pole, other pins for middle connection. Here we attached 2S & 3S connection for your information, the other spec. may be deduced by analogy.
2S:
3S:
Our Balance connector with 20cm length 20#AWG, support Max. 8A charging current, with metal ends that could process to the battery screw ends for connection.
With all these components, you could make 6V 20Ah (2S2P) or 12V 10Ah (4S) Power Battery Packs for eBike, R/C Boat, R/C Cars, Outdoor Back-up Power etc.
DO NOT CHARGE by Li-ion Charger!
Charged by LiFePO4 Charger if you have PCB/PCM/BMS protection board, our connection screw tabs and holders make the battery pack connected with BMS in your required shape easily. You may check below link for LiFePO4 Charger:
12V 4S 6A LiFePO4 Charger:
|
24V 8S 5A LiFePO4 Charger:
36V 12S 5A LiFePO4 Charger:
|
Could also charge by Smart Balance Charger that support "LiFePO4" battery type if your battery pack doesn’t include PCB/PCM/BMS protection board. You may check below link for Genunie iMax B6 Balance Charger:
 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category= |
Be aware of over-discharge as the LiFePO4 has a very stable discharge platform!
Feel Free to contact us for any technical question before ordering!
Package will ship by DHL, Fedex or EMS Express to worldwide (fast delivery) !
Brazil / Russia / Ukrain will send by EMS only!
Shipping
- We don't do combine shipping! Kindly check with separate shipping cost on "Shipping and Payments" page.
- We will ship via USPS
to U.S., it normally takes about 7-15 days to deliver.
- Other countries will ship by China Post
All shipments will have a tracking number to trace with.
Area | Standard Shipping Time | Delay if Backlogs |
Asia | 7-14 Days | 28-30 Days |
Middle East | 21-30 Days | 38-45 Days |
European | 11-16 Days | 28-38 Days |
Oceania | 16-20 Days | 28-35 Days |
South American | 28-35 Days | 45-65 Days |
Canada | 20-28 Days | 35-45 Days |
Russia | 28-30 Days | 45-68 Days |
Israel | 21-35 Days | 38-48 Days |
Italy | 20-28 Days | 38-45 Days |
Other Countries | 20-28 Days | 38-45 Days |
* Delays may occur on and around holiday seasons and when backlogs are coursed by unforeseeable events and actions by customs.
- Please note that Lithium Battery is sensitive for air shipping. Sometimes it may possibly being returned.
- If you do not receive the package over 30 days, kindly contact us and we will solve the problem for you.
- This is economy International shipping from China, delays and backlogs may occur.
- If you can't wait for long delivery, there's optional "Expedited Int'l Shipping" for selection.
After-sale Support- We only sell with Bran-new A grade products, every item has been tested by professional equipment before shipment.
- We do not responsible for quality problem caused by incorrect use, using wrong charger, refitting or welding.
- We do not advise to mix fresh and half-used battery as this may kill the fresh battery in short time.
- If the items are "Dead on Arrival", You may need to help for sending us more details.
- Defected Information like Battery Voltage, Charging & discharging Status, Pictures are necessary in finding out the problem.
- Communication is very important. Please trust us! We are happy to work with you in solving the problem.
Welding Service- We offer free-charge Welding Service!
- You may send message to us if you need solder the tabs or Series / Parallel - Connected spot welding.
- Its better if you could send us a drawing or picture by mail.
- Remember to leave the message again on transaction by ordering that we will not miss the information.