You are buying one (1) genuine A123 Nanophosphate® Lithium Ion Prismatic Pouch Cell, AMP20M1HD-A This is brand new cell made in the USA. It is fully tested and capacity is guaranteed. The cell will be shipped at the proper storage voltage, 3.20 to 3.30V. Nanophosphate® Lithium Ion Prismatic Pouch Cell AMP20M1HD-A KEY FEATURES AND BENEFITS - High usable energy over a wide state of charge (SOC) range and very low cost per Watt-hour - Excellent abuse tolerance and superior cycle life from A123’s patented Nanophosphate® lithium ion chemistry - High power with over 2,400 W/kg and 4,500 W/L AMP20 Cell Specifications Cell Dimensions (mm) 7.25 x 160 x 227 Cell Weight (g) 496 Cell Capacity (minimum, Ah) 19.6 Energy Content (nominal, Wh) 65 Discharge Power (nominal, W) 1200 Voltage (nominal, V) 3.3 Specific Power (nominal, W/kg) 2400 Specific Energy (nominal, Wh/kg) 131 Energy Density (nominal, Wh/L) 247 Operating Temperature -30°C to 55°C Storage Temperature -40°C to 60°C Abuse Test Result Nail Penetration Pass – EUCAR 3 Overcharge Pass – EUCAR 3 Over-discharge Pass – EUCAR 3 Thermal Stability Pass – EUCAR 4 External Short Pass – EUCAR 3 Crush Pass – EUCAR 3 This is NOT a reject cell that is meant to be recycled. This is different from the questionable cells sold at a low price with short tabs, puffed or wrinkled skin. They are cheap to buy but very expensive to own. Reject cells have one or more of the following characteristics: Short tabs, regardless of how they are called. Low continuous discharge rate, anything below 10C is low. Low burst discharge rate, anything below 20C is low. The cell's skin is wrinkled or puffed or has pinholes in it. Thanks for looking. |