Ralink 3062 chipset Offers 32-bit PCI-e connector Standard: IEEE 802.11n(draft 2.0), IEEE 802.11g, IEEE 802.11b Interface:PCI-E X1 Frequency range: 2.4GHz-2.4835GHz Radio Data Rate: 11n: 300/150/135/121.5/108/81/54/40.5/27/15Mbps 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps 11g: 54/48/36/24/18/12/9/6M (adaptive) 11b: 11/5.5/2/1M Spread Spectrum: DSSS Modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM) Transmission distance: up to 100m (indoor), up to 300m (outdoor) (depends on environment) Receive Sensitivity@PE:11n:-65dBm@10% PER 11g:-65dBm@10% PER 11b:-78dBm@8% PER Transmit Power: 15dBm Antenna plus: 2x2dBi Status LED indicator Data Security: WPA; 64/128-bit WEP; TKIP/AES Working temperature: 0°C to 40°C (32°F to 104°F) Working Humidity:10%~90% non-condensing Support OS: Windows 2000/XP/Vista/win7/linux
Note: 1 The network card's specific reception is determined by the wifi router transmitted signal strength, 300M network card has 54/150M downward compatibility ( eg. if a router is 54M, the card is 54M; if a router is 150M, then the card is 150M. ) 2 If the computer itself is equipped with WIFI network card driver, you need to uninstall the previous driver first. In this way, you can install the PCI-E NIC driver. 3 The correct way to install the driver: plug the PCI-E 300M network card into the motherboard PCI-E slot, and place the CD-ROM into the drive, then the computer prompts to find hardware and click the prompts to install the driver, about 1-2 minutes later, the driver is installed successfully, then restart the computer . |