Right Hand Aluminum Breech
Upgrade Kit for Several Crosman Models
.22 will fit: 2240, 2250,
2260, 1322, 2289 and the .177 will fit: 1377.
If you have the older rear cocking knob, this may fit, but will not be
fully functional. Email me. |
Q: What is included with
the "Breech Only" offering?
A: You get: the main breech block and the two barrel set screws. That is
all.
No bolt, no bolt handle, no screws, no rear site.
Note that with the exception of a two-piece bolt, your gun should already have
all the required pieces.
I have two piece bolts for sale separately if you want to go that route.
You need either the two piece "steel breech bolt" or the "stainless steel bolt".
One piece bolts (where the handle does NOT unscrew) will not work. |
Q: Fine. What's included
with the Breech + Bolt, Screws, etc offering?
A: This gets you everything you need, assuming you don't have any spare
parts laying around.
You get the correct bolt and handle in your desired size, both barrel set
screws, both mounting screws and the rear sight. |
Q: Does it have
dovetails for mounting a scope?
A: Yes! |
Q: Where is the
front screw location?
A: It's in the normal "front location" for maximum compatibility
with all Crosman models. |
Q: This is amazing.
Do you have it in left-hand?
A: Yep!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230966357843 |
Q: Both calibers are
available?
A: Yes, to change between .177 and .22 is only a matter of swapping
bolts (though only one bolt is included per sale). |
Q: Will the
one-piece brass bolts found on the plastic breeches work?
A: No, however I have drilled brass probes if you want one. I do NOT have
brass handles. |
Q: Will your
stainless steel bolt work?
A: Yes! |
Q: I know you do
powder coating. Can this be powdered?
A: Yes, at an additional charge. Email me. |
This
breech has several notable differences from the Crosman Steel Breech Kit: |
Advantage: Supports
the standard rear sight, which is included. Also supports scopes and other 11mm
mounts.
Disadvantage: Does not (easily) support the LPA MIM sight. |
Advantage: Two set
screws to hold the barrel in place (vs one screw on the Crosman kit). |
Advantage:
Lightweight aluminum with a much smoother finish than the Crosman steel
bluing. |
Disadvantage: Does
NOT come with the small plug that covers the bolt opening on the back.
This is the cover that would sit above the hammer cover.
Note that the Crosman plug will NOT fit without significantly grinding it
down. |