eBay
hantek dso1062b handheld 60mhz 1gs/s 2ch oscilloscope scopemeter & multimeter
Notizen vor der Bestellung:
  • In den meisten Fällen, wenn wählen Sie economy shipping, Verschiffenzeit ist ungefähr 20 bis 35 Tage.
  • Treten Sie mit uns bitte in Verbindung, bevor Sie Debatte öffnen, versprechen wir, jedes Problem sorgfältig zu lösen.
  • Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich.
  •  

    Features: 
     
    High bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 counts DMM with analog bargraph. 
     
    1M memory depth. 
     
    High refresh rate (2500 frames). 
     
    Large 5 6 inch TFT color LCD display£?High resolution(640*480£?, dual-window design --More clear, more detailed. 
     
    One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform. 
     
    Easy-to-use pop-up menu with built-in multi-language help system. 
     
    23 automatic measurements. 
     
    Waveform math: add, subtract, multiply, and divide. 
     
    Store and recall over. 
     
    Automatic cursor tracking measurements. 
     
    XY Mode. 
     
    Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems. 
     
    Waveform recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames. 
     
    Pass-Fail function compares a stored waveform to an unknown input. 
     
    Average mode for smoothing waveforms. 
     
    Square wave output (2V, 1kHz) for probe adjustment. 
     
    USB host/device 2 0 full-speed interface ,support removeable disk, LAN Optional ,easy to control by PC or long-distance. 
     
    Dimensions (mm):240(L)x165(W)x50(H), be carried easily. 
     
    Labview\VB\VC second design instance. 
     

     

    Specifications:

    Model

    DSO1202B

    DSO1102B

    DSO1062B

    Oscilloscope mode

    Bandwidth

    200MHz

    100MHz

    60MHz

    Real-time Sample Rate

    1GSa/s

    Equivalent Sample Rate

    25GSa/s

    Record Length(Sample Points)

    Single-channel: Maximum 1M; Dual-channel:Maximum 512k

    SEC/DIV Range

    2nS/div-2000S/div (in a 2, 4, 8 sequence)

    Delay Time Accuracy

    500ps

    Vertical

    A/D Converter

    8-bit resolution

    VOLTS/DIV Range

    2mV/div¡«5V/div at input BNC

    Position Range

    ±50V(5V/div),±40V(2V/div¡«500mV/div),2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)

    Rise Time at BNC

    ≤1.7ns

    ≤3.5ns

    ≤5.8ns

    DC Gain Accuracy

    ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
    ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

    Trigger

    Trigger Sensitivity
    (Edge Trigger Type)

    DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
    EXT£¨Typical£© 200mV from DC to 40MHz
    EXT/5£¨Typical£© 1V from DC to 40MHz 
    AC: Attenuates signals below 10Hz

    HF Reject: Attenuates signals above 80kHz

    LF Reject: Attenuates signals below 150kHz

    Noise Reject: Reduces trigger sensitivity

    Trigger Level Range

    CH1,CH2: ±8 divisions from center of screen
    EXT: ±1.2V EXT/5: ±6V

    Trigger Level Accuracy,
    typical (Accuracy is for signals having rise and fall times ≥20ns)

    CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)

    Holdoff Range

    100ns-10s

    Trigger Type

    Edge

    Trigger on the rising or falling edge

    Pulse Width

    Trigger (when >,<,=,≠) on positive or negative pulses
    Pulse Width Range: 20ns-10s

    Video

    Trigger on an NTSC, PAL, or SECAM standard video signal
    Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

    Slope

    Trigger (when >,<,=,≠) on a positive or negative slope
    Set Time: 20ns–10s

    Overtime

    from the rising or falling edge
    Set Time: 20-10s

    Alternate

    Internal trigger on edge, pulse width, video or slope

    Measurement

    Cursors

    Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz.
    Tracing: The voltage and time at a waveform point

    Automatic

    Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

    Meter Mode

    Max.Resolution

    6,000 Counts

    DMM Testing Modes

    Voltage, Current, Resistance, Capacitance,Diode & Continuity

    Max. Input Voltage

    AC: 600V, DC: 800V

    Max. Input  Current

    AC: 10A, DC: 10A

    Input Impedance

    10 MΩ

    Display

    Type

    Right angle 5.6 16-digit color LCD

    Resolution

    640*480 dots

    Contrast

    16 gears, with the progress bar to show adjustment

    Interface

    USB host and USB slave, Lan Optional

    Power Supply

    Voltage

     DC Input:12--17VDC, 1500mA

    Mechanical

    Size

    245 x 163 x 52 (mm)

     

    Pictures:

     

    Accessories:

     

    Package Includes: 
     
    1 x Original Package. 
     
    1 x New Hantek DSO1062B Digital Handheld Oscilloscope/Multimeter 200MHz 1Gsa/S.