This is a 7 filters set for a standard Reverse Osmosis Water Filtration Unit. The specifications of the set are as follows:
4 of Block Activated Carbon filters – Block Carbon
Filters are similar in their performance to that of GAC filters, being
made of fine coconut shell carbon they also do remove odors and tastes
of many organic compounds, chlorine especially. Though, because this
filters are made of a packed carbon (forming a cylinder block), they
offer a much finer filtration of suspended particles and dirt.
Micron rating: 5 Micron.
Dimensions: 9.75” x 2.5”
Lifetime: Replace once or twice a year, depending on the water quality.
2 of Melt-blown Polypropylene Sediment filters – Sediment
filter is often the first filter installed in the Reverse Osmosis
circuit. Sediment filters are made of fine melted polypropylene, which
is then blown and spun in a cylinder-like form. The main function of a
sediment filter is to remove large and fine particles from a drinking
water, such as sand, dirt, silt, and rust particles. Removal of such
particles allows for a better performance of all the following filters,
such as Carbon Block or GAC filters.
Micron rating: 5 Micron.
Dimensions: 9.75” x 2.5”
Lifetime: Replace two or three times a year, depending on the water quality.
1 of Inline Pre/Post Membrane filters – Inline
Granular Carbon filters are also known as polishing filters, because
they would usually be the last stage of any standard Reverse Osmosis
circuit. Being made of high quality coconut shell carbon they stabilize
the water tasting qualities and further remove any traces of bad tastes
and odors.
Dimensions: 10” x 2”
Lifetime: Replace once in 2 years.
All Filters are individually wrapped and sealed. All filters
meet NSF Standards and Regulations and are NSF Certified. Filters will
fit any Residential Reverse Osmosis Unit that features standard 10”
filter housing. |