eBay


1 set x 5 axis KCAM4 MACH3 EMC2 CNC Breakout board interface board



DESCRIPTION

SAM_0069.JPG

 

 

SAM_0070.JPG

 

 _conew1.jpg

 

 

 

nEO_IMG_3.jpg

 

 

nEO_IMG_1.jpg

 

5 axis CNC Breakout board interface adapter board

Features
* fully supports MACH3, KCAM4, EMC2, etc. to support the PC parallel port control software;
* all 12 leads all parallel data output pins, which can control the five stepper motor drive;
* with 5 way input interface, can connect limit switches and emergency stop switch, reset, on the knife;
* 5 input indicator lights indicate the input state;
* 12A relay with a way to control, normally open, normally closed are leads, user-friendly connection;
* power supply with 5V USB power supply or external power supply, easy access to the external power supply;
* the external drive enable signal amplification, filtering, enhancement;
* pulse, the direction of signal shaping, enhancing load capacity, data transfer speeds of up to 10MBit / S;
* output pin with an extended interface, you can use the pin 2.54mm or 2.54mmXH seat;

 

Overview
The interface board uses high-performance three-state bus driver and the 74HC244 Schmitt inverter 74HC14, the input signal is amplified, rectified, filtered signal after the output drive capability stronger more stable. 5V power input to increase the computer USB port to solve poor output current power output of small problems, but also increase the importation of light output instructions and output relay instructions to make operation more convenient to use, the interface board for the DB25-pin interface mode, good transmission MACH3 and control signals to the drive, this section is a highly cost-effective CNC interface board of choice for customers.
 

Applications
For air marking machine, laser processing equipment, mold processing, advertising, carving industry, CNC controllers and other small and medium sized automation equipment, instruments

 

 

nEO_IMG_1_conew8.jpg

 

 

DB25 control pin (PIN)
PIN Function Explain PIN Function Explain
1 EN Enable control signal  10 IN1 input 1
2 STEPX A (first axis) pulse 11 IN2 input 2
3 DIRX  A (first axis) direction of the signal 12 IN3 input 3
4 STEPY B (second axis) pulse 13 IN4 input 4
5 DIRY  B (second axis) direction of the signal 14 RLY relay control signal
6 STEPZ  C (third axis) pulse 15 LIMIT5 input 5
7 DIRZ C (third axis) direction of the signal 16 STEPB E (V axis) pulse
8 STEPA D (fourth axis) pulse 17 DIRB E (V-axis) direction of the signal
9 DIRA D (fourth axis) direction of the signal 18-25 GND GND

 

  

 

 

Interface Terminal Description
Name Description Remarks
 parallel port  DB25-pin to PC computer communication interface
USB port USB to computer  provides 5V power supply 
+5V +5 V external power input connector   
GND External power supply to GND  common ground with USB Power Port 
IN5  external limit input  internal pull-up, low light 
IN4  external limit input  internal pull-up, low light 
IN3  external limit input  internal pull-up, low light 
IN2  external limit input  internal pull-up, low light 
IN1  external limit input  internal pull-up, low light 
NO Relay normally open contact  When the parallel port P14 is low
This pin is connected with COM
COM relay commons  
NC normally closed relay contacts   When the parallel port pin P14 is low, this is not connected with COM  
+5V +5V output pin Anode connected drive optocoupler 
EN Enable output pin  Standard TTL level 
DIR direction output pin  Standard TTL level 
STEP pulse output pin Standard TTL level 

 

nEO_IMG__conew1.jpg

 

 

nEO_IMG_.jpg

 

Packing list:

  • 1 x 5 Axis Interface Breakout Board V5 type
  • 1x Parallel Cable
  • 1 X USB Cable

 

 


Payment Policy

We can only accept Paypal by now and thanks for your understanding
We apologize that we cannot accept other payment methods, such as cheque or postal orders

 
 
 
Shipping & Handling
 
 
  1. We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time .
  2. Before buying, Please make sure your address is correct. Or not, please correct it before payment
  3. Ship to worldwide by china air post service within 12-24 hours after payment completed received,
  4. Pls.contact me for the the tracking number if you need it.
  5. we advise shipping by DHL or EMS,and we have gave a discount for you,you can received it in 4-9 business days.
  6. it takes about 15-30days usually if shipping by Singapore/CHina/Hong Kong post air mail
 

Return & Refund Policy:

We absolutely stand behind our products. We also offer a 14 day money back guarantee should you be unhappy for any reason whatsoever. We will refund the entire cost of the item upon receipt of the returned item, not including the shipping and insurance charges. Our aim is 100% customer satisfaction!

the feedback is very important for us, pls leave me a positive feedback if you are satisfied with our service and our items,or pls contact with me if there are some problem with our items.we will solve it asap.

Negative feedback doesn't resolve problems, good communication does. Please contact me if there is anything and I will resolve it for you.

Once your item arrives in satisfactory condition, please leave feedback for us. Our automatic system will do the same for you

 

 
 

 


Template designs and graphics provided by Original Template Designs.