This is the newly upgraded controller board.
- Up to 32 servo motors can be controlled at the same time, either by  using a software on a PC, or UART communication ( TTL serial port) of  MCU (51, AVR, ARM, FPGA, PIC, etc.) to send commands to control the  steering. We can also download instructions to the servo motor  controller for offline operation.

we will provide programming software and mannual.

Features:
- Powerful MCU
- High controlling accuracy
- Offline operation function
- Identify baud rate automatically

Specfications:
- Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. (USB can be used  to power the chip on servos board. And it can be chosen automatically.  With the USB reverse protection, it can protect your computer from been  hurted by the reverse USB.)
- Servos power supply: DC (depends on the motors, generally 5V DC)
- Control channels: 32. (can be controlled at the same time and the  accuracy can be adjusted)
- Communication Input: USB or UART (TTL or USART). (The Bluetooth or  some other wireless module can be used to make the controlling)
- Signal Output: PWM (Accuracy 1us).
- Servo motor resolution: 1us, 0.09 degrees.
- Baud Rate: 9600,19200,28400,57600,115200,128000(recognized  automatically)
- Servo motors supported: Futaba, Hitec or some other Servos Motor  controlled by PWM.
- Dimensions: 63.5mm x 43.5mm x 1.6mm.
- Control mode: USB and UART (TTL) to accept command. (Comes with USB  data wire and PC controlling software)
- Flash memory: onboard 512K ROM (If every command is used to control  the 32 motors at the same time, more than 500 commands can be saved.)

Package:
  1x  32-Channel Servo Control  Board