eBay
World Shipping
7 Days Money Back

Powerful High Integrated 3Axis CNC TB6600 Stepping Driver Box Set, High 5.0 Amps

ΔTOP

 
 The Latest 3rd Generation Revolutionary TB6600HG 3 Axis Stepper Driver Box Set (TB3H-CD-S (Box))



 I: PCB Instructions & Specifications

 Descriptions:
  • Comparing with the previous 3rd generation TB6560AHQ Stepper Driver, besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has, this newly released 3rd generation TB6600HG Stepper Driver was specially developed for bigger stepper motors which have higher current. As long as the current range of the stepper motors is within 0.2-5.0 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new TB6600HG Stepper Driver.  
  • Actually, the 3rd generation TB6600HG Stepper Drivers have two types of versions, one is the standard version, and another is the professional version. Compare to the standard version, the professional version mainly has two more functions than the standard version, one is the “computer G-code recording function”, and another is the “manual programing function”. Except these two functions, these two types of versions have no other differences. 
  • Firstly, both of these two types of versions have upgraded their PCB boards, the re-designing the PCB board will avoid the TB6600HG chip on the board being easily blown as the previous version.  
  • With the embedded intelligent memory chip, the professional version of this 3rd generation 3 Axis TB6600HG Stepper Driver can easily record the G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc..) of the computer, and then rerun the recorded G-code to make the stepper motor work without the computer any more.     
  • Furthermore, the upgraded external manual control tools (display panel and control pad) on the professional version can be not only used for manually controlling the stepper motor, but also manually programming the G-code. All the manually Programmed G-code will also be recorded in to the embedded intelligent memory chip, and then we also can easily run the recorded G-code to control the stepper motor. Considering that the computer G-code recording function is enough for all the three axis working without computer, to avoid repeated function, the manual programming function is mainly designed for one axis to make linear motion, therefore, the three axis cannot be manually programmed simultaneously. This function is widely used on working which just need one Axis, such as RBI machine, Conveyor etc. 
  • Lately, both of these two types of versions adopt the totally enclosed optical isolation and bipolar constant-current chopper to insure working at low noise & vibration, and avoid creeping at a low speed. It is very suitable for driving the 2-phase and 4-phase hybrid stepping motors. 
  • In short, the qualities and functions of the new 3rd generation advanced 3 Axis TB6600HG Stepper Driver are revolutionized from the previous version. So, we believe that these two types of versions must satisfy different users on CNC DIY.  
  • The item you are watching is the 3 Axis Standard Version (TB3H-CD-S (Box)), if you need the other versions, please feel free to contact with us.  
  • Click here for the comparison between TB6560AHQ and TB6600HG Chipset. 
  • Click here for more details about the TB6600HG Chipset.
 Features:
  • High performance, cost-effective. 
  • Automatic idle-current reduction. 
  • To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display panel and control pad.  
  • Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched intelligently for each other without any interference. 
  • Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and Simultaneous display the changing of each axis'(X, Y, Z axis etc.) values on its screen. 
  • Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc.. Besides, the professional version also can automatically trail the path running path of G-Code from the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer and record the G-code into the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer. 
  • The professional version also support manual programming via the control pad, as long as input the required values on one axis and record them in the memory chip of the driver, and then run these recorded values to drive the axis to make linear motion, widely used on RBI machine, Conveyor and so on.  
  • Automatically finish Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer.  
  • Compatible with all the motors with 0.2A-5.0A (peak) rated current, four types of adjustable output current can be set on the driver board. 
  • 1, 2, 4(new mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly. 
  • Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. 
  • Totally enclosed optical isolation and single-chip PWM bipolar sinusoidal chopper to insure motors work at low noise & vibration, and avoid motors creep at a low speed.  
  • With one 0-10V PWM Signal output port for speed adjustment and one Relay control port. 
  • 5 types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc... 
  • Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
 Applications:
  • For processing various pattern mould.  
  • For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..  
  • For carving portrait, scenery, handwriting, sealing, etc..  
  • Suitable for any small-and-medium automatic equipment with CNC controller, such as  X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
 Dip Switch Settings:
 

II: DIP Switch Settings

  • Microstep Mode Selection:
Microstep Mode
SW1
SW2
SW3
N/A
ON
ON
ON
1(Full Step)
OFF
ON
ON
2
ON
OFF
ON
2
OFF
OFF
ON
4
ON
ON
OFF
8
OFF
ON
OFF
16
ON
OFF
OFF
N/A
OFF
OFF
OFF

  • Output Current Selection:
Output Current
SW4
SW5
SW6
0.2A
ON
ON
ON
0.6A
OFF
ON
ON
1.2A
ON
OFF
ON
1.8A
OFF
OFF
ON
2.5A
ON
ON
OFF
3.3A
OFF
ON
OFF
4.2A
ON
OFF
OFF
5.0A
OFF
OFF
OFF
 
 Further Details:
  • DC 12-48V power supply selection
    *Voltage Selection:
    12-24V DC power supply for Nema 17 stepper motors
    24-36V DC power supply for Nema 23 stepper motors
    36-48V DC power supply for Nema 34 stepper motors
    (High(≥50V) voltage will be easy to cause the driver and stepper motors to be damaged!!!)
    *Current Selection:
    Output current of the power supply can be calculated by the following formula:
    Output current = Rated current of your stepper motors * quantity + 2A
    (For example, if you want to drive 3 * 2A Nema 23 stepper motors, theoretically 24V 8A DC power supply is recommended, but higher power such as 24V 10A/15A also will be good.
    If you are not sure about the selection of power supply, please feel free to contact us for help)
  • Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.

 Connection Diagram For Reference: 

 
 III: Connection Diagram

ΔTOP

 Specifications:

  • Electrical Specifications
Input voltage
12V-50V(Peak) DC
Output current
0.2A-5.0A (Peak)
Drive type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable motor
Nema17, Nema23, Nema24, Nema34 (Rated current: 0.2A-5.0A)
Net weight
535g (Driver)
Dimensions
177*147*46mm

  • Operationg Environment & Other Specifications 
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 ℃－ 50℃ (32℉ － 122℉)
Humidity
40%RH － 90%RH
Operating Temperature
70℃ (158℉) Max
Storage Temperature
-20 ℃ － 65℃ (-4℉ － 149℉)
Total Weight
Approx. 650g (Driver + Control Pad + Display Panel)

ΔTOP

  • 1 x The 3rd Generation 3 Axis TB6600HG Stepper Driver With Aluminium Box (Standard Version) 
  • 1 x Build-in Control Pad (Standard Version)
  • 1 x Build-in Display Panel (Universal)
  • 1 x LPT Parallel Cable
  • 1 x CD   
  • Click here for the Mach3 software

ΔTOP

Estimated Delivery Time (subjects to stock availability)
UK, Australia, New Zealand, South Asia,East Asia 10-15 business days
USA, Canada, other EU countries(France,Germany, etc.) 10-18 business days
Italy, Spain 20-30 business days
South America, Other Countries 15-20 business days

Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:

- need the item urgently.

- require that the item should be delivered within a certain time.

- have any other questions/requirements about delivery.

Remarks:

*Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.

*Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.

*It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.

*Please contact us if you have any trouble in receiving your orders. We will help you to track them.

Agreement: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.