eBay

NEW v2 LUA ESP8266 NodeMCU WiFi IoT Development Board Module ESP-12E - TESTED

Product Description

New Version v2 ESP8266 NodeMCU LUA WiFi Development Board ESP-12E

+ FREE DuPont cable

Now available is the ESP8266 NodeMCU v2 development board - a true plug-and-play solution for inexpensive projects using WiFi. The NodeMCU guys have made an open source board for ESP8266 that looks the business and should let more people experiment with this great chip.

The module arrives pre-flashed with NodeMCU firmware so they're ready to go - just install your USB driver (below).
This NodeMCU development board contains a full ESP8266 WiFi module with all the GPIO broken out, a full USB-serial interface, and a power supply all on the one breadboard-friendly package. The NodeMCU is an open-source project and you can find all the design files and so on from their github page.
As part of our quality control process we test & flash the modules with the latest NodeMCU firmware - a Lua-based firmware for the ESP8266 which allows easy control via a neat scripting language - Lua - so you're ready to go in just a few minutes. The NodeMCU module can be powered via the USB socket.
NodeMCU is supported by the extensive community of users and opensource developers.

Genuinely tested: LED programmed to blink

NodeMCU Motor Shield

2WD WiFi NodeMCU ESP8266 Smart Car Kit

Features:

ESP8266 ESP-12E on board
Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your development in the fastest way combining it with the scripting language Lua!
Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware. Code like arduino, but interactively in Lua script.
Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style. Greatly speed up your IOT application developing process.
USB-TTL included, plug n play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
PCB antenna

Technical:

Wireless 802.11 b / g / n standard
Support STA / AP / STA + AP three operating modes
Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Remote firmware upgrade (OTA)
Support Smart Link Smart Networking
Working temperature: -40 ℃ ~ + 125 ℃

Resources:

NodeMCU Motor Shield

Control Electrical Devices From your web browser
ESPlorer - multi-platform IDE (Integrated Development Envinroment) for LUA for NodeMCU and MicroPython

Arduino IDE for ESP8266

Firmware Flash
NodeMCU home page
NodeMCU github page
Lua home page
Creating a GUI interface for Lua with App Inventor 2

Lua script Blinking Led example:

lighton=0
pin=0
gpio.mode(pin,gpio.OUTPUT)
tmr.alarm(1,2000,1,function()
    if lighton==0 then
        lighton=1
        gpio.write(pin,gpio.HIGH)
    else
        lighton=0
         gpio.write(pin,gpio.LOW)
    end
end)

Installing the USB drivers

You will need new drivers for the CP210x USB serial chip. Download yours from the following links:

MacOS (then see below) - INSTALL THE DRIVER BEFORE CONNECTING YOUR NODEMCU! If you piug in your NodeMCU for the first time before installing the USB driver it will cause an involuntary shutdown.
Linux
Windows

Package includes:

1x ESP8266 NodeMCU LUA WiFi Development Board

1x FREE 10-wire DuPont cable. Please specify either Male to Male (default), Male to Female or Female to Female (subject to stock. May consist of one, two or three sections)

Important Note:

Our goal is to achieve 5-star rating for each transaction.

If you are not 100% satisfied, PLEASE do not leave a neutral or negative feedback but contact us by eBay message or email first so that we can help you.

Condition

Brand new

Warranty

All items sold as tested are tested before dispatch. All serial numbers are recorded before dispatch; these will be checked if item is returned. All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal, any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules. All new items (as indicated in listing) will carry a standard 12 month warranty. If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection. If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement. If the item is designated Seller Refurbished, Second User or Used it will carry a 30 day warranty and the above procedure will be followed with regard to repair or replacement, within the 30day period from receipt of item. Any item that is designated Sold As Seen/described implies no warranty.

No guarantees are made on second user batteries. Please do not assume that this battery will perform like a new battery.

Please note- Any software is not covered by the warranty policy. This is due to the possibility of software being corrupted via viruses or misuse. Please refer to specific item details for specific details.

*** No international shipping. Delivery will be to registered eBay/Paypal address only.

*** BIDDERS with 5 and above rating only, unless the Paypal account has been verified or you are collecting in person.

*** Goods will NOT be sent to unverified Paypal accounts. The purchase will be cancelled and the buyer will not be notified.

*** BIDDERS outside the UK may NOT bid. Sorry ***

*** All items are security marked. Please ensure all security markings and stickers are intact or any warranty offered will be void.