eBay

SG- 1R Gamma Probe

excellent condition! The SG-1R probe for gamma measurement is designed to be used with any CSP survey meter. Its good sensitivity makes it ideal to detect gamma emitters starting from background level. SG-1R is part of CANBERRA’s new SMART Probe (CSP™) family. It includes all key components of hardware circuitry (high voltage power supply, amplifier, discriminator, etc.). Also, the intelligence associated with controlling those components is located in the probe – that is control and storage of key parameters, settings, calibrations, probe ID, alarm settings (10 values for each unit to display with default setting), etc. Thus the probe is a fully integrated subsystem talking and transmitting the measurement to the instrument, which is used for display.

Radiagem 4000 Portable Dose Rate Meter 

The RADIAGEM is a survey meter that includes an energy-compensated Geiger-Muller counter. Therefore it measures dose-ate equivalent H*(10) immediately after you switch it on.

External probes can be connected to the Radiagem to measure remote dose-rate equivalent or radioactive contamination. So it can be used in measurement mode or in source finder mode.

It disposes of a "Data logging" function which allows the saving of 1000 times and date stamped measurement points in the memory integrated into each new probe connected to Radiagem and 1536 time and date stamped measurement points in the Radiagem's memory. The instrument has an easily decontaminated ABS-polycarbonate plastic casing.

Features ■ Measurement of H*(10) ambient dose equivalent rate up to 10 rem/h ■ Easy-to-read and backlit analog bargraph and digital display ■ Visual and audible alarms on dose rate and integrated dose equivalent ■ External probes for remote measurements, dose rate and surface contamination ■ Date stamped data-logging (1000 points in probe memory and 1000 points in Radiagem memory) ■ Scaler/timer mode in Data-logging ■ Lightweight, waterproof and easy to decontaminate ■ Rugged and easy-to-use.

Alpha Beta Gamma Probe SABG 15

This probe enables the alpha, beta and gamma surface contamination to be monitored. The probe is based on a Geiger Muller and has its own high voltage supply and shaping circuit.
It is connected directly on RADIAGEM connector to allow one hand operation or via 1.5m cable 

The probe is compatible with the Radiagem 2 (display in c/s), the Radiagem 4 (display in CPM, maximum value: 9999 CPM), the Radiagem 2000 (display in c/s, Bq or Bq/cm2) and the Radiagem 4000 (display in CPM, DPM or DPM/100cm2).

Mixed Alpha-Beta Probe SAB 100

The new CSP (Canberra Smart Probes) SAB 100 dual alpha - beta probe is designed for measurement of contaminated areas with single alpha or beta or a contamination of alpha and beta radiation.

This probe can be connected to the new survey meters of Canberra (for example Radiagem 4000).

It can be connected to the survey meter (through the appropriate cord (code:77336)).
It enables the following three types of radiation to be measured:
-alpha radiation alone with energy > 3 MeV
-beta radiation alone with energy > 150 keV
-alpha and beta radiation combined.

This proble is able to store up to 1000 data points in its memory. All data-logging information are downloaded from proble memory to PC via a USB cable. This new Canberra smart probe is linked directly to PC to proceed to setup and calibration. 

Probe sensitivity parameters are stored in the probe's memory and read by the host instrument to allow a perfect interchangeability of probes.