Achieve -20" Hg vacuum with 12V

Pump air and liquid/air mixtures (pump system is all plastic and electrically isolated)

Maintenance free and setup within a minute

9cm x 7cm x 4cm and less than 300g

Also a 30 psi air compressor

Comes with 2.1mm Female DC input connector.

Overview

Specifications

FAQ

Setup Instructions

This 12V pump is powerful, small and versatile. It has diverse DIY lab/light industrial/hobby applications from vehicles (e.g. electric vehicle car braking systems) all they way to electronics (e.g. providing suction for SMT pick and place) and lots more in between.

We also sell the following related items: 20" Hg Pump + PSU + Hose, 26" Hg Pump Kit, 28" Hg Pump Kit and 2 Litre Vacuum Chamber.

Vacuum Range: -20" Hg to 0 (where 0 = atmospheric pressure)
Air Compression Range: 0 to 30 psi (where 0 psi = atmospheric pressure)
Airflow: 9-15 LPM (litres per minute) at atmospheric pressure
Pump Dimensions: 7cm x 4cm x 9cm (length x width x height)
Time To Maximum Vacuum: 40s per litre of vacuum chamber volume


You will receive:

1x 12V Diaphragm Pump
1x 2.1mm DC Female Input Connector

All the components in this kit are new.

For any more questions you might have please contact me on my mobile, the eBay message system or directly at stuart@thinkitmakeit.co.uk.

Q: Does it matter which way the terminals are connected?
A: Air flow always in the same direction no matter which way the terminals are connected.

Minimal assembly is required and no tools are needed. Setup should take 2 minutes.

1. Attach the DC connector leads to the copper terminals located at the top of the of the pump. Note that it doesn't matter which way round the terminals are connected; the air will flow the same direction.

2. Connect your own 12V DC 2A supply with 2.1mm male plug into the DC connector (or skip 1. if you want to connect your supply directly to the pump's terminals).

3. Find the small arrows marked on the pump's plastic inlet (air intake) and outlet (exhaust) barbs.

4. Connect your own 6mm (1/4") internal diameter hose to the pump's inlet.

Note: Please don't use jubilee clips on the hose as they actually create air gaps; 6mm (1/4") internal diameter hose makes a perfect seal onto the pump's barbs without any help.