eBay
Below item is powered by Canton-electronics Ltd:
 
Modules No: RT111;
 
QTY: 2 pcs key fobs and 1 pcs Receiver Controller . (These remotes don't have battery inside )
RT111 1
 
 
 

 

Technical indicators:

1.operating voltage: DC 12V ;       

2.static operating current:≤8mA, Single chanel working current  ≤ 40 mA ,2 Chanels Work current (self-locking/Toggle )≤ 80mA;

3.Working temperature :-10°C- +60°C;        

4.Receive sensitivity:≥-105dBm;

5.the working frequency:433.92MHz;
6.output current:≤10A;

7.size:74.5*54.5*27mm ; 

8: Momentary Mode ,Latch Mode  , Toggle Mode can be adjustable by jumper .
9. Pls connect the receiver modules properly before power supply ;
10: 4 chanels;
11: Learning function (can works with EV1527 and PT2262 remote , can store 16 pcs different code remote );
12: Max load : 1000W;  
 
 
Advantage :
1:  Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 Learning remotes to re-learn;

Output

 

 Relay mode :

BC= Normally close (NC ) ;
AB= Normally open (NO ) ;
  • Normally-open (NO) contacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or "make" contact. NO contacts may also be distinguished as "early-make" or NOEM, which means that the contacts close before the button or switch is fully engaged.
  • Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or "break" contact. NC contacts may also be distinguished as "late-break" or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged. 

A.singnal Inter-locking (Latch)----connect 2 and 3 ;

B.singnal Self-locking (Toggle) ---- connect 1 and 2 ;

C.singnal Non-locking (Momentary ) ---- disconnect the jumper ;

·         Toggle: Press->On; Press again->Off ;

·         Latched: Press->On; Press other button->Off ;

·         Momentary: Press and hold->On; Release->Off ;

 

Learning method and steps

1.       Keep pressing learnig key on receiver board , release the button when LED is off , enter the learning state ;

2.       Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .

 

Clear the deposit information

Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;

Connect to AC220V home light system :


Transmitter :
 
Transmitter Module No.: YK004 -2 2 Bottons

CJ001 2

 

Technical Data :
Transmitter Module No.: YK004 -2 2 Chanels
 Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in on local market )
Operating current: ≤ 12mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK;
Operating frequency:433.92MHZ ;
Frequency deviation:±0.2MHz;
Encoding format: Learning Code ( EV1527 ) . Cannot cloning or copy any remotes ;
Transmit power:10 mW.
Data Rate : 50~60KHZ;
 
 
Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.

 

Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .
 
Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days  a week.
 
Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not  including  shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.
 
PAYMENT
We accept PayPal only. 
We only ship item to your PayPal verified address. 
Payment must be received within 3 Days from the date of purchase. 
Please leave note in PayPal when making the payment if you have any special request (colors/size).
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders. 
 
Import tax : 
 We will dispatch the item as SAMPLE or GIFT,  label the total amount on the custom declare invoice .
 Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.