eBay
maxnc 10CL mill
mini cnc desktop milling machine is ideal for making custom rings and jewelry via wax models and investment casting, and for dentistry, model making, light machining, and Maker & hobby uses. Fast prototyping using subtractive methods.

The machine was in storage for over a year come's on when plugged in. They are being sold as is because they have not been fully tested. They come with soft ware, and assessory.

The machine's are fully supported by the manufacturer,XiMotion, so you can get all parts and service from them, the machine is still being sold by them and their distributors.

The MAXNC T10 is a closed loop Servo system.
Beware of non-closed loop machines...if they lose their stop counts, they will either trash the part you are making or your cutter, or even the mill itself.
This controller runs up to 4 axes from a single parallel port on a host PC upon which the Maxnc software runs.
The control reads the encoders at a rate of over 60,000 times a second and the feed-back is analyzed by the CL motion system, which has encoders and has a resolution of 0.00025 inches.

Spindle ON/OFF and speed control from the software
Anti-backlash system provides zero backlash on all axes
Light weight but durable frame and stages made from 6061-T^ aircraft aluminum. Hard anodizing provides exceptional wear resistance.
Proven slide dovetail construction with adjustable gibbs for long lasting accuracy.
Spindle supplied with ER-16 collets. It can accept optional drill chuck or tool holders.
Collet range 1/16" to 3/8"

Based on the position of the encoders, the outputs to the motors are advanced, retarded or modified as needed - this is the difference between a servo system and an open loop stepper system.

(which can slip and lose its position, as well as not necessarily tracking the commands being issued to it by the controller software's Gcode) which you'll find in almost all of the hobby and low cost machines.
The servo motors used in the CL systems are of step configuration to obtain very fast acceleration an deceleration rates, important in continuous contouring operations. Machine operates at up to 60 inches per minute with the standard 20 threads per inch screws.

The machine comes equipped with combination HOME and LIMIT switches.

G” & “M” code programming
0.00025” resolution
Linear interpolation
Circular interpolation
Helical interpolation
Backlash compensation
Keyboard jog mode
Automatic cycle
Step cycle
Includes the MAXNC software.

This machine is being sold as is no Refunds.

T2CL lathe
Controlled from the printer port of your PC computer. Standard lathe ‘G’ code programming with simultaneous X and Z axis interpolation and full contouring capabilities. Large cross slide table and 20 tool offsets allows turning with multiple tool programs.

X and Z axes are driven with Nema 23 175 oz-in servo motors and the spindle is driven by a powerful 1/3hp DC motor. Program control of spindle on, off, forward and reverse by ‘M’ codes. Spindle speed is controlled from the program by use of the ‘S’ word. Spindle is equipped with a 100 line encoder for synchronization with the axes for threading. G33 and G76 codes are available for automatic threading.

Includes a 3 Jaw chuck, 3 tool posts, 2 tool bits and Software.

The ‘T2CL’ software includes a lathe ‘G’ code generator from DXF files and a tool path screen plot verification program and sample NC programs.

The machine was in storage for over a year come's on when plugged in. They are being sold as is because they have not been fully tested. They come with soft ware, and assessory.

This machine is being sold as is no
Refunds.

Posted with eBay Mobile