eBay
ATMEGA328_PU_KIT mit Spannungsstabilisator

"JustISP "

AVR Programmer DIY KIT

AVR Programmer KIT zum selberbauen

Wenn Sie möchten, dass wir für Sie das Kit löten,  können Sie den entsprechenden Löts ervice von hier kaufen.
If you wish that we solder the kit for you you can buy the additional soldering service from here

Eigenschaften:
  • AVR MCU Programmer (er kann die .hex Datei lesen/schreiben, er kann die Fuse-Bits lesen/schreiben)

  • Power  LED (Rot)

  • USB ready  LED  (Grün)

  • USB 5V Stromversorgung für den  MCU - with ON/OFF Schalter und LED (Orange)

  • Flashing LED während Programmierung des MCUs

  • USB A  buchse - 1,8m USB Kabel inklusive

  • 6 polig IDC Verbindungskabel - Inklusive

  • Abmessungen: 60mm x 40mm
  • 3.3V / 5V MCUs  Für 3.3 V muss man den 5 V Stromquelle (mit dem enthaltenen Schalter) ausschalten  und den MCU von einer externen 3.3V Stromversorgung  einschalten
       Man kann leicht alle von AVRDUDE unterstützte AVR  MCUs (die nachstehende Liste) programmieren unter Nutzung von AVRDUDE oder jede Programmierungssoftware die den "USBTiny(ISP)" Programmer unterstützt. Sie werden bekommen auch eine AVRDUDE kopie und zwei freie Windows Software sehr leicht zu benutzen. Man kann den JustISP auch  mit dem Arduino IDE nutzen um den Arduino bootloader zu brennen.
   
          
       Das Kit ist NICHT MONTIERT.  Sie müssen ihn LÖTEN.

     Der JustISP wurde entwickelt nur mit THT Komponenten.Deshalb es ist sehr leicht das Kit zu löten. Bitte beachten Sie den Platz der Komponenten. Alle Komponenten wurden auf die Platine gezeichnet, so müssen Sie nur die Liste der gelieferten Komponenten mit der Zeichen von der Platine vergleichen.
    Wenn Sie etwas nicht verstehen oder wenn Sie Fragen haben,
ICH HELFE IHNEN GERNE!
Features:
  • AVR MCU Programmer (it can read/write the .hex files, it can read/write the fuses)

  • Power  LED (Red)

  • USB ready  LED  (Green)

  • USB 5V power supply for the target  MCU - with ON/OFF switch and LED (Orange)

  • Flashing LED during programming the MCU
  • USB A  connector  - 1.8m USB Cable included
  • 6 pin JTAG Connector with  CABLE - INCLUDED
  • Dimensions: 60mm x 40mm
  • 3.3V / 5V MCUs (For 3.3V  you must  switch off (with the included switch) the 5V power and power the MCU from an external 3.3V Power suply.)
            You can easily programm all the MCUs suported by the AVRDUDE (the list below) using any programming AVRDUDE or any software that suports the "USBTiny(ISP)" programmer. You'll also  receive a copy of AVRDUDE and two free Windows software very easy to use. You can use JustISP with the Arduino IDE to burn the Arduino bootloader.
   
 
The KIT is NOT ASSEMBLED. It must be Soldered.
 

   JustISP was designed only with THT components so it's very easy  to solder. Please pay attention to the position of the components. The PCB has all the components drawn  on it, so you only need to compare the supplied component list with the drawings from the PCB.
    In case you don't understand something or you have questions,
I'LL GLADLY HELP YOU!   
 JustISP benutzt AVRDUDE (Freeware - OpenSource) und unterstützt alle von AVRDUDE unterstützten MCUs:
     AT32UC3A0512, AT90CAN128, AT90CAN32, AT90CAN64, AT90PWM2, ,AT90PWM2B, AT90PWM3. AT90PWM316, AT90PWM3B, AT90S1200, , AT90S2313, AT90S2333, AT90S2343,  AT90S4414,  AT90S4433,  AT90S4434, , AT90S8515, AT90S8535, AT90USB1286, AT90USB1287, AT90USB162, , AT90USB646, AT90USB647, AT90USB82,
   ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega1284P, ATmega1284RFR2, ATmega128RFA1, ATmega128RFR2, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164P. ATmega168, ATmega168P, ATmega169, ATmega16U2, ATmega2560, ATmega2561, ATmega2564RFR2, ATmega256RFR2, ATmega32, ATmega324P, ATmega324PA, ATmega325, ATmega3250, ATmega328, ATmega328P(Arduino MCU), ATmega329, ATmega3290, ATmega3290P, ATmega329P, ATmega32U2, ATmega32U4, ATMEGA406, ATmega48, ATmega48P,
ATmega64, ATmega640, ATmega644, ATmega644P, ATmega644RFR2, ATmega645,
ATmega6450, ATmega649, ATmega6490, ATmega64RFR2, ATmega8, ATmega8515,
ATmega8535, ATmega88, ATmega88P, ATmega8U2,
            ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny1634, ATtiny20, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny261, ATtiny4, ATtiny40, ATtiny4313, ATtiny43u, ATtiny44, ATtiny45, ATtiny461, ATtiny5, ATtiny84,  ATtiny85, ATtiny861,
ATtiny88. ATtiny9,
  ATxmega128A1, ATxmega128A1revD, ATxmega128A1U,  ATxmega128A3,   ATxmega128A3U,  ATxmega128A4, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega128D4, ATxmega16A4, ATxmega16A4U, ATxmega16C4, ATxmega16D4, ATxmega16E5, ATxmega192A1, ATxmega192A3, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A1, ATxmega256A3, ATxmega256A3B, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4, ATxmega32A4U
ATxmega32C4, ATxmega32D4, ATxmega32E5, ATxmega384C3, ATxmega384D3, ATxmega64A1, ATxmega64A1U, ATxmega64A3, ATxmega64A3U, ATxmega64A4, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3, ATxmega64D4, ATxmega8E5.  
 JustISP uses AVRDUDE (freeware -OpenSource) and it  suports all the MCU suported by AVRDUDE:
     AT32UC3A0512, AT90CAN128, AT90CAN32, AT90CAN64, AT90PWM2, ,AT90PWM2B, AT90PWM3. AT90PWM316, AT90PWM3B, AT90S1200, , AT90S2313, AT90S2333, AT90S2343,  AT90S4414,  AT90S4433,  AT90S4434, , AT90S8515, AT90S8535, AT90USB1286, AT90USB1287, AT90USB162, , AT90USB646, AT90USB647, AT90USB82,
   ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega1284P, ATmega1284RFR2, ATmega128RFA1, ATmega128RFR2, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164P. ATmega168, ATmega168P, ATmega169, ATmega16U2, ATmega2560, ATmega2561, ATmega2564RFR2, ATmega256RFR2, ATmega32, ATmega324P, ATmega324PA, ATmega325, ATmega3250, ATmega328, ATmega328P(Arduino MCU), ATmega329, ATmega3290, ATmega3290P, ATmega329P, ATmega32U2, ATmega32U4, ATMEGA406, ATmega48, ATmega48P,
ATmega64, ATmega640, ATmega644, ATmega644P, ATmega644RFR2, ATmega645,
ATmega6450, ATmega649, ATmega6490, ATmega64RFR2, ATmega8, ATmega8515,
ATmega8535, ATmega88, ATmega88P, ATmega8U2,
            ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny1634, ATtiny20, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny261, ATtiny4, ATtiny40, ATtiny4313, ATtiny43u, ATtiny44, ATtiny45, ATtiny461, ATtiny5, ATtiny84,  ATtiny85, ATtiny861,
ATtiny88. ATtiny9,
             ATxmega128A1, ATxmega128A1revD, ATxmega128A1U,  ATxmega128A3, ATxmega128A3U,  ATxmega128A4, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega128D4, ATxmega16A4, ATxmega16A4U, ATxmega16C4, ATxmega16D4, ATxmega16E5, ATxmega192A1, ATxmega192A3, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A1, ATxmega256A3, ATxmega256A3B, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4, ATxmega32A4U
ATxmega32C4, ATxmega32D4, ATxmega32E5, ATxmega384C3, ATxmega384D3, ATxmega64A1, ATxmega64A1U, ATxmega64A3, ATxmega64A3U, ATxmega64A4, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3, ATxmega64D4, ATxmega8E5.
 
Erforderliche Wekzeuge
(NICHT IM KAUFPREIS ENTHALTEN)
  • Lötstation
  • Lötmittel
Tools you need
 
NOT INCLUDED
  • Soldering tools
  • Solder
Das KIT enthält:
  • 1 x  Spezielle Leiterplatte - in der Fabrik hergestellt
  • 1 x MCU  (bereits fertig programmiert )
  • 1 x DIP 20 Sockel
  • 1 x 6 polig IDC Buchsenleiste
  • 1 x  USB A Sockel
  • 1 x 12 MHz Quarz
  • 1 x 100 nF Keramikkondensator 
  • 2 x 22pF Keramikkondensator 
  • 1 x 100 uF Elektrolytkondensator
  •  10 x Widerstand 0,25W
  •  4 x LED (Rot, Grün, Orange, Rot-Blau) )
  • 1 x 6 polig IDC verbindungkabel 
  • 1 x USB Kabel (1,8m lang)
  • 1 x PCB Schalter
  • 1 x Schaltplan mit  Komponenten Liste (via EMAIL)
  • 1 x Windowstreiber und software(via EMAIL)

The KIT contains:
  • 1 x Dedicated PCB - Factory made
  • 1 x MCU (with the firmware already installed)
  • 1 x DIP 20 Socket
  • 1 x 6 pin IDC Header
  • 1 x USB A Socket
  • 1 x 12 MHz Quarz Crystal
  • 1 x 100 nF Ceramic Capacitor
  • 2 x 22 pF Ceramic Capacitor
  • 1 x 100 uF Electrolytic Capacitor
  • 10 x Resistor 0.25W
  • 4 x  LED (Red,Green,Orange,Red-Blue)
  • 1 x 6 pin IDC connecting cable
  • 1 x USB cable(1.8n long)
  • 1 x PCB Switch
  • 1 x Schematic with component list. (via EMAIL)
  • 1 x Windows driver and software(via EMAIL)
 Aus persönlicher Erfahrung:    From my experience:
  Das JustISP Kit ist ein Produkt, das wurde lange getestet. Ich benutze ein JustISP um die AVR MCUs zu brennen und es ist seht leicht und unkompliziert es zu bedienen: Sie müssen einfach die .hex Datei von Ihrem Projekt  auf den gewünschten MCU hochladen. Mit dem JustISP können Sie auch die Fuse-Bits lesen/schreiben.      JustISP Kit is a  product that was  long time tested  I use a JustISP  to burn the AVR MCUs and is very easy and uncomplicated to operate it: you  simply upload the .hex file from your project on your desired MCU. You can also read/write the  fuses with JustISP.
  • Alle Elektronische Komponenten sind NEU 
  • Fragen? Probleme? Bitte zögern Sie nicht mich zu kontaktieren!
  • Wir glauben streng, dass eine gute Kommunikation kann alles erledigen. Wir antworten gern Emails so schnell wie möglich und immer innerhalb 1 Tag! Wir antworten Emails auch abends und am Wochenende!!!
  • All the components are NEW 
  • Question or problem - don't hesitate to ask.
  • I speak: English, French, German, Italian, Spanish
  • We strongly believe that  everything can be solved with good communication. We gladly answer E-mails  the same day. We answer E-mails in the evening and on weekends too!!!
Die Produkte sind immer auf Lager in DEUTSCHLAND.
Mein Unternehmen ist DEUTSCH und, als Folge, der Käufer ist nach deutschem Recht geschü
tzt.
The items are on stock in Germany. 
  Ich garantiere Ihnen:
  •  Gute Preise für gute Produkte
  •  Flexibilität
  •  Sehr schneller Versand
  •  Sichere Verpackung
  •  1 MONAT  freiwillige  Rückgabegarantie: Unabhängig von Ihrem gesetzlichen Widerrufsrecht können Sie sämtliche Produkte, die von meinem Shop  direkt gekauft werden, innerhalb von 30 Tagen ab Erhalt der Ware  zurückgeben, sofern die Ware vollständig ist und sich in ungebrauchtem und unbeschädigtem Zustand befindet.
  • Sehr schnelle Antworten per E-mail
I guarantee you:
  • Good prices for good products.
  • Flexibility.
  • Very fast shipping.
  • Secure packing.
  • 1 MONTH  Money back guarantee as long as the product is complete, unused and undamaged.
  • Very fast answer via E-mail

   Bitte, schauen Sie meine andere Listings für mehrere Elektronische Komponenten und Mikrocontrollern.


   Bei Bedarf kann ich eine Ebay Listing mit jeder Kombination oder Menge (beschränkt natürlich nur  bei meinem aktuellen Lager) von Elektronischen Komponenten, die man jetzt in meinen Listings finden kann. Nur schicken Sie mir  eine Email mit der Liste der gewünschten Komponenten!

  Please see my other listings for more MCU - related electronic components.

  If you wish I'm happy to do for you  an EBAY LISTING  with any combination or quantity (limited by my stock, of course) of electronic parts that you can find in my listings. Just send me an email with a list of what you need!
Lieferung und Versand

  Wenn Sie mehrere Produkte kaufen,  und die automatische Kombizahlung von Ebay scheint nicht richtig zu sein, bitte bezahlen  Sie nicht gleich, schicken Sie mir eine Email oder Gesamtbetrag anfordern. Ich werde die Versandkosten neu berechnen und Ihnen die Gesamtrechnung schicken.
             Post & Package                    

  If you buy multiple items, and the automatic combined postage from Ebay is not correct, don't pay, please request total, so I can calculate the combined postage and send you the Ebay invoice.      
Die #Axxx Nummer aus dem Titel ist unsere interne Artikelnummer The #Axxx from the title is our internal  Item number