eBay
This spacer will allow you to easily build your own triple XP-G2/Nichia 219/XP-L flashlight using one of the Convoy S2/S5/S6/S7/S8. 

Hole is pre-drilled in spacer, but a hole will need to be drilled in the middle of your pill/host star place in order for the wires to be able to pass through. 


This sale is for 1 true copper spacer. It can be used to install 1.5mm thick PCB led+6mm height TIR lens (Carclo 10507, 10508, 10509, 10510 or 10511, ideal to make triple with 92CRI nichia NVSL219B LEDs, you can also use low-cost triple on 20mm pcb with 20mm optics from Kaidomain) into Convoy S2, S5, S6 or S8.


 Pills are machined from solid copper rod, have almost ideal flat top and bottom surfaces. Top fits up to 20mm MCPCB, you can use thermal grease between mcpcb and the spacer or solder mcpcb down to the spacer if you are using copper mcpcb: tutorial video
  • Height: 13.4mm
  • Diameter (widest point): 20.0mm
  • Diameter (narrowest point): 15.9mm

Warning! This spacer is made from true copper, that have more than 380 W·m−1·K−1 thermal conductivity, and weights 17..18 gramms. It has slightly pink color (my camera can not show it`s real color). Low-cost chinise spacers are often made from brass/bronze (they also has big density, so spacer can be heavy, but will not have much red in it`s color) or different colored alloys (they look like real copper but weight much less).

LEDs, MCPCB, driver, optics, pill are not included with sale.  This sale is for the 1 spacer ONLY!

Item has been described to the best of my ability and many pictures have been presented for your decision making.

Good luck, and happy bidding.