eBay
  • Product features
    • Using the NTC thermistor sensor , good sensitivity
    • The comparator output signal clean waveform is good , driving ability, than 15mA
    • Adjust the temperature distribution bit detection threshold
    • Working voltage 3.3V-5V
    • The output format : Digital switching output (0 and 1)
     
  • Product description
  • Certified US & Top Rate Ebay Seller

    1pcs Digital Thermal Sensor Module Temperature Sensor Module for Arduino

    Product features

    • Using the NTC thermistor sensor , good sensitivity
    • The comparator output signal clean waveform is good , driving ability, than 15mA
    • Adjust the temperature distribution bit detection threshold
    • Working voltage 3.3V-5V
    • The output format : Digital switching output (0 and 1)

     

    Product description

    Module Features:
    1. Using the NTC thermistor sensor , good sensitivity
    2. The comparator output signal clean waveform is good , driving ability, than 15mA
    3. Adjust the temperature distribution bit detection threshold
    4. Working voltage 3.3V-5V
    5. The output format : Digital switching output (0 and 1)
    6. With bolt holes for easy installation
    7. Using a wide voltage LM393 comparator
    Module for use???
    1. The thermal resistance of the module is very sensitive to the ambient temperature , generally used to detect the ambient temperature
    2. Through the adjustment of the potentiometer , can change the temperature detection threshold (ie, temperature control value) , if necessary to control the ambient temperature is 50 degrees , the module in the corresponding ambient temperature to which the green light , DO output is HIGH level falls below the set temperature value, the output is high , the green light does not shine
    3. DO output can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the ambient temperature changes
    4. DO OUR outputs can directly drive the relay module , which can be composed of a thermostat to control the operating temperature of related equipment can also be connected to the fan used to heat and other
    5. The detection range of the module's temperature 20-80 °C
    6. This module can also be replaced with a wire temperature sensor for water temperature, water tank controlled
    Size: 3.2x1.4cm/1.25*0.55""
    Quantity:1pc
    Package includes:
    1 x Digital Thermal Sensor Module


    Item Specifics
    Brand :Unbranded/Generic
    UPC :Does not apply
    MPN :Does Not Apply

    Payment

    We accept PayPal payment and all major credits through Paypal only. •To avoid an unpaid item dispute, all payments must be received within 7 days from the end of the auction.

    Shipping

    We ship all the orders from USA For US orders, economy (est 5-10 days) shipping is FREE AND FREE tracking number

    Returns

    Our goal is to ensure your complete satisfaction with your purchase. If you are not satisfied with your purchase for any reason, you may request for an exchange, replacement, or refund within 14 days of receiving the order.

    Customer Services

    If you have any questions or concerns, you can reach us during our business hours of Monday-Friday 9am-4pm through eBay messages . We appreciate your business and if you are satisfied with our service, please provide positive feedback and rate the details of the transaction. Our goal is to make sure you are a satisfied buyer so please give us the chance to do so should anything go wrong with your order. Please contact us before leaving any negative or neutral feedback,

    Certified US & Top Rate Ebay Seller

    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    1pcs Digital Thermal Sensor Module Temperature Sensor Module for Arduino

    Product features

    • Using the NTC thermistor sensor , good sensitivity
    • The comparator output signal clean waveform is good , driving ability, than 15mA
    • Adjust the temperature distribution bit detection threshold
    • Working voltage 3.3V-5V
    • The output format : Digital switching output (0 and 1)

     

    Product description

    Module Features:
    1. Using the NTC thermistor sensor , good sensitivity
    2. The comparator output signal clean waveform is good , driving ability, than 15mA
    3. Adjust the temperature distribution bit detection threshold
    4. Working voltage 3.3V-5V
    5. The output format : Digital switching output (0 and 1)
    6. With bolt holes for easy installation
    7. Using a wide voltage LM393 comparator
    Module for use???
    1. The thermal resistance of the module is very sensitive to the ambient temperature , generally used to detect the ambient temperature
    2. Through the adjustment of the potentiometer , can change the temperature detection threshold (ie, temperature control value) , if necessary to control the ambient temperature is 50 degrees , the module in the corresponding ambient temperature to which the green light , DO output is HIGH level falls below the set temperature value, the output is high , the green light does not shine
    3. DO output can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the ambient temperature changes
    4. DO OUR outputs can directly drive the relay module , which can be composed of a thermostat to control the operating temperature of related equipment can also be connected to the fan used to heat and other
    5. The detection range of the module's temperature 20-80 °C
    6. This module can also be replaced with a wire temperature sensor for water temperature, water tank controlled
    Size: 3.2x1.4cm/1.25*0.55""
    Quantity:1pc
    Package includes:
    1 x Digital Thermal Sensor Module


    Item Specifics
    Brand :Unbranded/Generic
    MPN :Does Not Apply

    We accept PayPal payment and all major credits through Paypal only. •To avoid an unpaid item dispute, all payments must be received within 7 days from the end of the auction.

    We ship all the orders from USA For US orders, economy (est 5-10 days) shipping is FREE AND FREE tracking number

    Our goal is to ensure your complete satisfaction with your purchase. If you are not satisfied with your purchase for any reason, you may request for an exchange, replacement, or refund within 14 days of receiving the order.

    If you have any questions or concerns, you can reach us during our business hours of Monday-Friday 9am-4pm through eBay messages . We appreciate your business and if you are satisfied with our service, please provide positive feedback and rate the details of the transaction. Our goal is to make sure you are a satisfied buyer so please give us the chance to do so should anything go wrong with your order. Please contact us before leaving any negative or neutral feedback,

    PushAuction