A  stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a  stalk next to the steering wheel) with an aftermarket unit.

Included Free CTMULTILEAD.2 Stereo Patch Lead

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Peugeot 206	2002 - 2009	RB1/RD1/22RC200 PU2325A/PU2294 Philips/Clarion
Peugeot 406	2002 - 2004	VDO/Clarion RC200/220/260/280/290 PU2294/1633(RD3)
Peugeot 807	2002 - 2005
Peugeot 307	2002 - 2005
Peugeot 607	2002 - 2004
Peugeot Partner	2002 - 2007

Connection: 8 Way ISO

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX  head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly  checking to see if your make, model and year of car is listed in the  advert. Secondly by checking to see if the connection in the picture  listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.