eBay

Citroen / Peugeot Diagnostic

PC based diagnostic product selection guide

Vehicle diagnostic scantools:
Standard OBDII: ELM327 1.4 USB compatible, protocol K+L+CAN, 1996~present
Standard OBDII: ELM327 1.4 Bluetooth compatible, protocol K+L+CAN, 1996~present
Standard OBDII: ELM327 1.4 WiFi compatible (Vgate), protocol K+L+CAN, 1996~present
BMW : Carsoft 6.5 RS232
Mercedes : Carsoft 7.4 Standard RS232, protocol K, Mercedes-Benz, 1991~2004
Mercedes : Carsoft 7.4 Multiplexer RS232, protocol K, Mercedes-Benz, Sprinter, 1991~2004
OPEL : OPCOM 1.33 USB, protocol K + CAN, 1992~2009
OPEL : OPCOM 10pin adaptor for OPEL before 1996
OPEL : OPEL Tech2 USB, protocol K, ~1994
OPEL : OPEL Tech2 RS232, protocol K, ~1994
PSA : Lexia-3 USB compatible, protocol K+CAN, Citroen, Peugeot, 1995~2010
PSA : Lexia-3 30pin adaptor before 2001
VAG : VAG-COM 409.1 USB compatible, VW/Audi/Seat/Skoda, 1989~2004.09
VAG : VAG-COM 10.6 USB compatible, VW/Audi/Seat/Skoda, 1989~2010.06
VAG : VAG-COM 2+2 adaptor for VAG car before 1996
NISSAN : Consult II RS232, Cefiro/Sentra/Maxima, etc., 1989~2000, 14pin DLC
NISSAN : Consult III

Vehicle ECU tuners:
Galletto 1260 USB, 1993~2008
KWP2000
VAG Tacho 2.5, VW, Audi, protocol K only, read and revise partial table value in ECU
VAG Can Commander 5.1, VW, Audi, protocol CAN, read and revise partial table value in ECU
VAG K+CAN 1.4, VW, Audi, protocol  K/CAN, read and revise partial table value in ECU

Description:

Unlike other universal car scanner tools which only read trouble codes.
It is like original dealer's diagnostic scanner for comprehensive diagnosis for Citroen and Peugeot cars.
This diagnostic software allows you to perform nearly complete diagnostics of all vehicles from 1995 till 2009.
Diagnostics is performed via OBD II connector or via manufacturer connector before 2001.
The connector is located near steering wheel.
Our diagnostic interface contains K-Line multiplexer, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The diagnostic functions

Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

Read trouble codes
Displays all stored and pending trouble codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

Clear trouble codes
This function clears all stored trouble codes and other diagnostic information.

Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc.
Values can be displayed in graph, 9 values at once, or full listing of all measured values.
Logging to file is also supported, which allows offline analysis.

Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Programming functions/Adaptation
This feature is of great importance in all vehicles after car is repaired, or after broken control units are replaced.
Because systems like engine control units, immobilizers, airbags, alarms, body control units, and some others, require to reset or proceed configuration programming.

System requirements

Hardware:
CPU: Intel Celeron/Pentium III 400 MHz (Pentium4 2.4GHz recommended)
Memory: 128 MB RAM (1024MB recommended)
HDD: 50MB free space (4GB recommended)
Interface: USB 1.1 port (USB 2.0 recommended)

Platform:
Microsoft Windows 98SP2/2000/XP/7 (virtual xp mode). Windows starter version is not supported.
with the latest service pack installed.

Language support:
Peugeot: 
Arabia, Chinese, Indonesian, Iranian, Israel, Japanese, Thai, Turkish, English, German, French, Russian, Spanish, Danish, Greek, Hungary, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia.

Citroen:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

Buyers feedback of usage:

1997 Peugeot 406 1.8i XU7JP4 (OK, Belarus)
1997 Peugeot 406 2.0 Manual Petrol (OK, Malaysia)
1998 Peugeot 106 Electric (OK, Norway)
1999 Peugeot 406 2.0 HDi 90hp (OK, Belarus)
2001 Peugeot 206 XR 1.6 V8 (OK, Argentina)
2001 Peugeot 406 2.0 HDi 110hp (OK,Belarus)
2001 Peugeot 406 2.2 HDi (OK, Finland)
2001 Peugeot 607 2,2 HDi Diesel (OK, Ireland)
2002 Peugeot 206 Petrol (OK, Russia)
2002 Peugeot 307 2.0 HDi (OK, Finland)
2002 Peugeot 406 1.8i EW7J4 (OK, Belarus)
2002 Peugeot 406 2.0 HDi 110hp (OK,Belarus)
2003 Peugeot 307 1.6 XS Petrol (OK, Malaysia)
2003 Peugeot 307 2.0 HDi 90hp (OK,Belarus)
2004 Peugeot 307 1.6 HDi SXI 56 (OK, UK)
2005 Peugeot 307 2.0 HDi SW 100Kw V16 (OK, Austria)
2006 Peugeot 407 2.0 HDi (OK, UK)
2007 Peugeot 206 1.6 V16 (OK, Argentina)
2007 Peugeot 307 1,6 HDi (OK, Finland)
2010 Peugeot 307 1.6 V16 (OK, Argentina)

1995 Citroen XM 2.5 TD (OK, Norway)
1998 Citroen Xantia II 2.0 16V (OK, Russia)
1998 Citroen XM 2,0 TurboCT (OK, Norway)
2001 Citroen C5 HDi (OK, Portugal)
2001 Citroen C5 2.0 HPi V16 (OK, Netherlands)
2001 Citroen Saxo 1.1 (OK, Finland)
2001 Citroen Xsara 1.6 Petrol (OK, Malaysia)
2002 Citroen C4 (OK, Netherlands. need Pin 1 shorted to Pin 16 for 12V)
2002 Citroen C5 2.0 HDi 90hp (OK,Belarus)
2002 Citroen C5 2.2 HDi (OK, UK, Poland)
2002 Citroen Evasion 2.0HDI RHW (OK, Belarus)
2003 Citroen C3 1.4 Auto (OK, UK)
2003 Citroen C5 2.0 HDi Auto (OK, UK)
2003 Citroen C5 2.2 HDi Auto (OK, UK)
2003 Citroen C8 2.2 HDi (OK, Czech)
2003 Citroen Xsara Picasso 1.8 16V (OK, Netherlands)
2003 Citroen Xsara Picasso 1.8 16V SX (OK, Finland)
2004 Citroen C4 (OK, Netherlands)
2004 Citroen C5 2.0 HDi (OK, Belarus)
2004 Citroen Xsara 1.6 V16 110HP (OK, Spain)
2007 Citroen C5 2.0 HDi (OK, Hungary)
2008 Citroen C3 1.4 (OK, Finland)
2009 Citroen C4 1.6 THP (OK,Greece)
2010 Citroen C4 HDi (OK, Argentina)

2002 Fiat Ulysse 2.0 JTD 110hp (OK, Belarus)

Package List

1. Main Unit (PSA 30pin, year 1993~1996. Green LED indicator)
2. Adaptor - Unit to OBD2 (Unit 30pin to OBD2 16pin male, 1996~present)
3. Adaptor - Unit to PC USB (Unit 15pin to USB A, 26cm)
4. Adaptor - Unit to PC USB (Unit 15pin to USB A, 285cm)
5. Adaptor - OBD2 to crocodile (OBD2 16pin female to ISO 2pin + crocodile, 275cm, pre-1993)
6. Download instruction by email.

Note:
You can leave memo to request DVD with no extra charge.
Customs may ask to pay duty or forfeit the package because the presence of DVD. It is buyer's own risk.
If your car is older than 1996, you may need to buy additional 30-pin adaptor. please check my another listing.

Warranty

DOA Warranty: 14 days of receive. For defect, damaged, incorrect items, buyer can ask refund or replacement. Buyer pays EMS shipping for full refund.
Warranty: One year.

Technical support:
Please send question on ebay or by chatting with Skype. My Skype account is eddieyu80.

Repair:
Please inform us in advance before return damaged product.
For damaged product return for repair, buyer pays register air mail/parcel shipping fee back to seller, and seller pays for return back to buyer.

Shipping & Tracking

Delivery Time & Tracking in detail

Track EMS:
Taiwan Chunghwa Post Track & Trace Service
Tracking number "EExxxxxxxxxTW" where nine x totally.

For Russia-Kazakhstan-Belarus buyers:
For new law of Customs Union of Russia-Kazakhstan-Belarus since Aug, 2010,
individual may not be able to import diagnostic equipment for personal use.
Entrepreneur can import and has to pay 20% import duty and document fee.
If you are not an Entrepreneur and want to buy for personal use.
We have agent in Belarus handling importation. Please send me email first.

Shipping:
Standard int'l flat rate: by postal office Expree Mail Service (EMS)
EMS is not available from Taiwan to Croatia, please select airmail of my other listing.
EMS to some east European countries may be forwarded via Germany (longer time).

Log in your eBay and Paypal account to get tracking number after shipped.
I will fill in Customs declaration form as "Gift, Computer cable set, USD45".