eBay

CNC Kit 3 Axis Stepper Motor Driver Nema17 12V10A 220V

Hi, you are bidding a GREAT VALUE 3 AIXS CNC PC CONTROL COMPLETE KIT !

Package includes:

  • 1 x New 3 Axis TB6560 Driver Controller Board 1/16Microstep, 12-36V, 1.5A-3A
  • 3 x New 42BYGH47-401A Single-Shaft Stepper Motors 0.44 Nm/62 Oz-in/1.68A
  • 1 x New 12V 10A power supply

 

Product Features:
  • Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
    For TB6560AHQ Datasheet, Please click here.
  • 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
  • Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
  • Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !
  • On board current switching - Power output can be set according to specific user requirement !
  • Full closed-type optical isolation to protect the user's computer and equipment
  • Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
  • 4 channel inputs interface- Can be used for XYZ limit and emergency stop !
  • Professional design - Two stage signal processing with super anti-jamming !
  • Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !
  • Four-input Control; Allow setting the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment!
  • Universal architecture - Supports most parallel software MACH3,KCAM4 etc!
    *For compatibility with other softwares, please feel free to contact us!
  Dip settings:

Current Setting 1 2 Decay Mode Settings 3 4 MicroStep Settings 5 6
100% ON ON FAST ON ON 1 ON ON
75% ON OFF 25% ON OFF 1/2 ON OFF
50% OFF ON 50% OFF ON 1/8 OFF ON
25% OFF OFF SLOW OFF OFF 1/16 OFF OFF

 Further Details:

  • Power supply DC 12-36V
    *This stepper motor directly gets the power from the stepper driving controller board, it doesn't require a separate power source.
    *Voltage Selection:
    12-16V DC power supply for Nema 17 stepper motors
    16-24V DC power supply for Nema 23 stepper motors
    24-36V DC power supply for Nema 34 stepper motors
    (High voltage will burn up the chips or stepper motors!!!)
    *Ampere Selection:
    Output current of the power supply can be calculated by the following expressions:
    Output current = Rated current of your stepper motors * quantity + 2A
    (For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.
    If you are not sure about the selection of power supply, please feel free to contact us for help)
  • The power output of 12V shall be applied to the radiator fan of 12V
  • Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
  • Suitable for unipolar or bipolar stepper motors.
  • Spindle speed controlled by the voltage from the parallel interface.
*NOTE: Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.

 Connection Diagram: 

 *NOTE: These external tools on the left and bottom of the following picture are only for exhibition, we don't have them to sell at the moment!

Electrical properties (ambient temperature Tj = 25 ℃ pm)：

Input Power

12-36V DC power supply

Stepper motor drive current

1.5A - 3A/phase

Drive type

Double-pole constant flow PWM actuation output

Compatible Stepper motors

2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

Data Sheet for 42BYGH47-401A Stepper Motor

* If you need other models, Please feel free to contact us!
We sell items to most countries of the world. For cost saving purpose, we can't keep a lot of stock for every item in every location. Your order with us may be sent from anyone of our dispatch centers that has sufficient in stock quantity. Typical delivery durations(for reference only) are:
Estimated Delivery Time(Airmail Packets)
UK, Australia, New Zealand, South Asia, East Asia 10-15 business days
USA, Canada,other EU countries(France,Germany, etc.) 10-18 business days
Italy, Spain 20-30 business days
South America, Other Countries 15-20 business days

Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:
- need the item urgently.
- require that the item should be delivered within a certain time.
- have any other questions/requirements about delivery.

Remarks:
*Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
*Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
*It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
*Please contact us if you have any trouble in receiving your orders. We will help you to track them.

PayPal: We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge)
* If you have difficulty to make payment by PalPal please contact us for alternative payment method.

Remarks:
*Please send payment within 5 days after auction ends. All sales are final, shipping and handling costs are also NOT negotiable.
*We will use your PayPal shipping address as the delivery address.
*Please make sure that your shipping address is correct.

14 Days Money Back Guarantee:
If you are not satisfied with the item purchased from us. Please inform us in writing(e.g. e-mail, eBay message, fax, letter) within 14 days of receipt of goods. We will guide you to return and refund the item. Please note that the postages / custom fees(if any) spended in such an order are on the customer's cost.

Free Replacement:
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us when you get the item. We will arrange a replacement as soon as the case is confirmed.

Suppliers Warranty:
We offer one month warranty on all products purchased from us. If your item has any warranty issue please contact us for a satisfying solution.

Requirements:
*All qualified returns/replacement must be guided by us. We may not accept your return without informing us in advance.
*Customs fee, handling charge, postage and insurance are not refundable.