eBay

100%  Brand New

 
 

 
Features:
1) Wireless serial bluetooth port.
2) With free power adapter bottom board come with well power regulator.
User can connect 3.3 to 5VDC and connect TX and RX to your control IO  (general 3.3 to 5V digital input output of MCU or arduino IO is ok, or  general TLL IO)
3) Easy to connect this module with PC, just search and key "1234" passcode.
4) With white SMD LED on the adapter board, can see the Bluetooth connection  status.

Step to connect:
1) Connect the wiring, power up, while the device is not connected, the  bluetooth module board has a white LED flashing
2) At PC side, search bluetooth device.
3) Found name called "LINVOR" device
4) Connect it, and passcode is "1234"
5) While connection is ok, you can see the LED become always on.
6) Enjoy

Industrial serial port bluetooth, Drop-in  replacement for wired serial connections, transparent usage. You can use it
simply for a serial port replacement to establish connection between MCU and  GPS, PC to your embedded project and etc.

Computer and peripheral devices
GPS receiver
Industrial control

MCU projects
Default serail port setting : 9600, N, 8, 1

Pairing code : 1234
Running in slave role: Pair with BT dongle and master module

Usage:
Coupled Mode: Two modules will establish communication automatically when  powered.
PC hosted mode: Pair the module with bluetooth dongle directly as virtual  serial.

Bluetooth protocal : Bluetooth Specification v2.0+EDR
Frequency : 2.4GHz ISM band
Modulation : GFSK(Gaussian Frequency Shift Keying)
Emission power : <=4dBm, Class 2
Sensitivity : <=-84dBm at 0.1% BER
Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Security : Authentication and encryption
Profiles : Bluetooth serial port

CSR chip : Bluetooth v2.0
Wave band : 2.4GHz-2.8GHz, ISM Band
Protocol : Bluetooth V2.0
Power Class : (+6dbm)
Reception sensitivity: -85dBm
Voltage : 3.3 (2.7V-4.2V)
Current : Paring - 35mA, Connected - 8mA
Temperature : -40~ +105 Degrees Celsius
User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200,  230400,460800,921600 ,1382400.
Dimension : 26.9mm*13mm*2.2mm

Pin definition :
PIO8 connects with LED cathodea with 470ohm series resistor in between. LED  NEGATIVE connects to ground. It is used to indicate the module state. After  powered on, flashing intervals differ in different states.

PIO9 is used to control LED indicating paring. It will be steady on when  paring is successful.

PIO11, module state switching pin. HIGH ->  response to AT command; LOW or floating -> regular work status.

With build-in reset circuit, reset is completed  automatically after powered on.

Steps to set to MASTER:

Set PIO11 HIGH with a 10K resistor in between.

Power on, module comes into AT Command Response  Status

Open HyperTerminal or other serial tool, set the  baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow

Control
Via serial port, send characters "AT + ROLE = 1 r n",if successful, return  "OK r n", where r n is carriage return.
Set PIO11 LOW, re-power, then in Master state, automatically search for  slave module and connect.

Package list :
HC-06 Bluetooth Module x1
4P cable x1

 

Payment & Warranty

We only accept payments via PayPal.

Warranty & Return:
1. If you are unsatisfied, you can return the item in original  conditions (New, Never Used), then we give you the refund or replacement.
2. If the item arrives with apparent damage, please contact us and take  photo on it, we will can exchange it for you.
3. If you make sure that a product is defective before using it, we will be  able to accept it back for exchange or refund.
4. In any case, shipping fee is non-refundable.
5. Buyer must pay the return postage for any reason, no exception. and we  will pay the resend postage (In case of need to resend).
6. All the item accept return in 30days.

We know that sometimes  when order problems arise, it can be very frustrating, we are there with you  every step of the way to make your experience more pleasant. Please feel  free to contact us for solution, when you have any  questions.

Please  don't open case or give Neutral or Negative feedback (including low rating  feedback) before contact  us, Otherwise you will be on the blacklist in  the future.

Shipping

All items  will be  shipped within 1~2 business day after payment.

Items shipped to United States are via USPS (ePacket shipping).

Items shipped to other countries, we offer two shipping methods for you to  choose. One is ordinary Air Mail without tracking number (Economy  Int'l Shipping), And the other is Registered Air Mail with tracking  number (Standard Int'l Shipping). We highly  suggest you choose registered mail ,because it can be tracked.

Ship to address  provided by ebay  if  no special notes from buyer .

Delivery Time: Normally, It Takes About 10-30 Business Days to Arrival  for most Countries.
*5-14 days to USA.
*10-25 days to Australia / Canada.
*14-30 days to major cities in Europe .
*4 - 8 weeks to Italy , Brazil ,Russia.

Please contact us if you  have not receive the item over 30 business days.

However, it may delay due to industrial strike    action, severe weather,  custom reasons or peak seasons, such  as Christmas/New Year Holidays.