Brand new pressure transducer.
Input: 0-150 psi.
Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Accuracy: within 1.5% of reading (full scale).
Current draw: less than 4 mA.
Burst (over or max pressure) pressure: minimum 300 psi.
Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for +5V. Black for ground. Blue for signal output.
Our material is using top of line 316 stainless steel (not 304) and high temperature auto-graded plastic.
For different thread size, 1/4", 3/8", 1/2" NPT, see blow:
http://www.ebay.com/itm/272326336606?item=272326336606&viewitem=&vxp=mtr
We will give you $5.00 refund if you buy the above fitting set.
For matching gauge (only we have this gauge), see our store listing:
http://www.ebay.com/itm/271942495366?item=271942495366&viewitem=&vxp=mtr
Other range available: 5 psi to 2500 psi, nobody have such wide range product as us. See blow:
http://stores.ebay.com/Industrial-stuffs/Pressure-Transducer-/_i.html?_fsub=2911276017
You may need a long 10' cable to use with this sender, see below:
For 12V (wide range) powered transducer (very unique), see listing below:
We are shipping from US, and warrenty for 6 month replacement. We specify how to make, test and set our own technical standard (US) on those products. Please note most other sells the similar product is copied from us, include listing descriptions, even curves. Further more, we are the only company have the matching gauge for the transducer.