eBay

1套450 V2 B 全套散装版走EMS

 

After the buyers self-assembly,

 In order to fly.

 If you are used to the right throttle (mode 1), please contact us when you buy or leave us a massage about this. If we have not get any information from you, we will ship the left throttle (mode 2) to you. Please inform us before you buy if you have any request!!!

Effect diagram (assembly required buyers):

 

 

We will provide random canopy according to our inventory!! 

V2canopy

Carbon Frame:

New main rotor head assembly: 4mm feathering shaft+ main rotor holder with thrust bearing design

]

Metal Tail:

Overall packing,Buyer assembly,According to the following spare parts shipped to the buyer:

Helicopter Unassembled Package:

Box size: length: 42CM; width: 21CM; High: 11CM

 

Description:

Metal carbon 450 V2 B  3D Helicopter RTF

1.  Parts Compatibility:  Align T-REX 450SE V2, CopterX other kinds of 450 size

2.  quantity:   450 V2 B RTF SetX1 set

3.  100% Brand New!

4.  Attention: It is not the align product

5.  Specification:

●Length:660mm
●Height:230mm
●Main Blade Length:325mm
●Main Rotor Diameter:700mm
●Tail Rotor Diameter:150mm
●Motor Pinion Gear:12T/13T
●Main Drive Gear:150T
●Autorotation Tail Drive Gear:106T
●Tail Drive Gear:25T
●Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
●Weight(w/omain blade):450g
●Flying Weight:Approx.730~760g
●Color carton:42x20.5x11cm
●Outer carton:44x43x35cm ,6sets/ctn

6.  Accessories(Buyers need to self-assembly only before the flight):

●450 V2 B RTF SetX1 set(With 325MM Wood Rotor BladesX1 set,Fiberglass Canopy),Suitable for 3D flight.

●FMT-40A Brushless ESCX1,Suitable for 3D flight.
●FMT108 Brushless motor 3800KVX1,Suitable for 3D flight.
●3S1P 11.1V 2200mAh 20CX1,Suitable for 3D flight.
●Transmitter:  2.4G 6 channel remote control X 1,Suitable for 3D flight.
●Receiver:  2.4G 6 channel Receiver X1,Suitable for 3D flight.
●Gyro:  FMT009 Gyro X 1,Suitable for 3D flight.
●Servo:9gx4pcs
●CartonX1(length: 42CM; width: 21CM; High: 11CM)

7.  Instructions:

During hard 3D flight, its actions are very quick and precision.
V2 is Combined with high torque brushless motor for great power. 

● This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled.
● New CNC carbon frame only 1mm, improve the rigidity and perfect for 3D flying.
● CCPM version, new aluminum parts for prompt, precision actions.
● New battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, and can adjust the center of gravity according to the weight of battery, it reduces the correction when the heli rolling.
● Rigid CNC aluminum rotor head for precision and smooth movements.
● Using new Main rotor holder with thrust bearing and 4mm Feathering shaft, features smooth rotation and stability under high rotation speed.
● Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
● New cg amended tail blades feature streamlined and quick, make the gyro more efficient.
● New tail rotor control set with dual bearing, features CNC control piece and smooth structure design, get smooth pitch travel.
● Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don't need to add the weight, but you can see the flexibility of 3D actions.
● CNC tail pulley assembly and tail holder are using high rigid aluminum alloy, features wear resistant and falling resistance.
● New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
● Use Aluminum alloy drive pulley and tail drive pulley, high regid and wear resistance. It is efficient to reduce the rotation loss and makes more smooth.
● Using new high strength ball links and stainless steel linkage balls on the whole unit, feature wear resistance, anti-oxidization.
● Tail rotor hub made of stainless steel, very rigid.

● Use 35pcs precision bearing.
● Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.

 

Transmitter Description:

 

 

 

 

 

Digital 2.4GHz 6-Channel Transmitter(T6EHP)
 
 

Digital 2.4GHz 6-Channel RC system T6EHP   adopted FHSS 2.4GHz technology, it is applied for 3D helicopter. Owing to the most advanced 2.4GHz radio control technology, it is needless to fit crystals for both transmitter and receiver, meanwhile RC system can avoid the interaction problem best up to the advanced code matching mechanism.

Standard Programming Functions :

Model Select – six model memory.
Model Type – helicopter programming. (for airplane is another version)
Servo Reversing – on all six channels.
Dual Rate/Exponential – for ailerons, elevator and rudder.
End Point Adjustment – fine-tunes servo throws on all six channels.
Digital Trim – stores trim settings for each model for aileron, elevator, rudder and throttle.
Fail Safe – a safety throttle setting in case of loss of transmitter signal.
Battery Fail Safe – moves the throttle to a preset position when the airborne pack reaches 3.8V.
Stick Mode – choose from Mode 1 through 4.
Range Checking – Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
Changeable Throttle Stick – select ratchet for airplanes or smooth for helis.
Adjustable Stick Length – choose the length that suits your flying style.

Helicopter-Specific Programming Functions:

5-Point Normal and Idle Up Throttle/Pitch Curves.
Throttle Hold – for autorotation.
Revo (Revolution Mixing) – mixes rudder and pitch together.
Gyro Mixing – two gyro gain settings can be programmed and selected during flight.
Swash to Throttle Mixing – corrects slowing of the engine's speed caused by the swashplate.
Swashplate Types – choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
Swash AFR – Adjustable Function Rate, for use with 1S, 3S or 3E swash types


 

Shipping: Good News! From now on, all of our products shipping to the United States will be sent by ebay shipping tool (EMS-EYB) or Express Delivery, buyers from America can expect to receive their parcels in 7-10 working days (Not including exceptional cases).For more information, please contact us directly. Thank you!

 

---I am going to give you by EMS, which it can faster and more safely to ship to you.

---I am afraid we have to exclude remote country in ebay, so if you want to buy this item, then please contact me. we can conclude out of ebay, and you just only pay the extra shipping price 35.00 USD or more, that's enough(because the post office regulated that we should pay much more shipping price for remote country)

 

1.  We shipping to the worldwide.

2.  Item will be shipped within 1-3 business days .

3.  The shipping rates include the cost of shipping, handling, packaging and related manpower costs.

4.  We aren't guarantee 100% tax free!

5.  Delivery time is around 5-15 business days to most countries:         

  • Sales Tax:
  • No Sales Tax is Required

     

     

    Payment:

     

    1.  We only accept payments via PayPal.

    2.  All payments must be prepaid, no Cash and COD payments

     

    Warranty & Return:

  • All products have been checked and packaged in good condition before dispatch.

  • In case the item is defective, please inform us within 30 days of receipt, we will replace a new one. No Refunds are offered.

  • Buyers have to pay for the return cost and we will pay the cost for resend.

  • We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback.
     


    On Mar-03-10 at 01:00:33 PST, seller added the following information:

    Specification: CD disk (one pcs), the helicopter specification is used on the helicopter what is compatible with Align helicopters. Please be attention that the specification is just for reference to assemble and test the helicopter. So the specification may be not the same as the one you received. The spart parts you received also may be different with the specification you see. Everything is according to the item what you received as the criterion. The specification is just for reference .


  •               Notes for the holidays

     

    My dear friend,

    As the Spring Festival is approaching,we will  take a holidays from 30th to Feb8th,during this time,we will stop shipping and unable to respond your emails,we are very sorry for the inconvenience caused.

    So we suggest no deals during this time and if you have any questions, you can leave us a message,We will help you solve the problems as soon as we come back from our holidays.please don’t open case or  do other things that will brings bad effects on us,we are extremely sorry for the inconvenience caused,thank you for your understanding,

    Purchase during the holiday will be subjected to have approximately 15 days’ dalay,because the post office will have a holiday as  well,,so masses of parcels will be stocked,if you need your item urgently,we hope you can buy it in your country,thank you for your understanding

     fmt