The bitterness of low quality is long remembered after the sweetness of low price is forgotten!

You are bidding on a brand new MISSOURI RAIDER 1600 WATT/ 9 BLADE WIND TURBINE

COMES IN 12 VOLT 3 PHASE OUTPUT MODEL

3 phase output is the most efficient , no voltage and amperage loss in long runs

like DC suffers from. DC output requires heavy expensive cable

and has a high power loss over long runs.

 (the wind turbines shown above and below COME UNPAINTED.)

 

 
 

AND COMES WITH A 2 YEAR WARRANTY

(see details below)

FOR EXTREME LOW WIND CONDITIONS

 

Blades begin to spin at ONLY 7 MPH Wind Zone 1 and begins making power immediately!

WE BELIEVE IN THE QUALITY OF OUR RAPTOR GENERATION 4 WIND

TURBINE BLADES SO MUCH WERE NOW GIVING A

LIFETIME WARRANTY AGAINST THEM BREAKING

FOR ANY REASON ! (see details below) FREE REPLACEMENT!

 

 

 

 

 

 

MISSOURI WIND AND SOLAR'S NEW RENEGADE PMA

THE MISSOURI RAIDER 1600 WATT 
9 BLADE WIND TURBINE   

UP TO 1600 WATTS OF PURE POWER OUTPUT  IN HIGH WINDS
USING OUR NEW RENEGADE 2 PMA

THIS IS NOT A DELCO BY ANY MEANS

SPECIFICALY DESIGNED FOR WIND TURBINE USE

 

 All new rotor design,THE ONLY ONE OF IT'S KIND !!!!
And manufactured by Missouri Wind And Solar

RENEGADE PMA's have amazing power and GREAT low speed start up!

Now with N45 Rare earth magnets!

The most powerful magnet in any pma

 

 

_________________________________________________________________________

THE NEW RENEGADE 2 PMA CAN PRODUCE POWER JUST BY TURNING IT BY HAND!

Our "RENEGADE PMA rotor is the newest rotor on the market with the latest technology.

Slant core is old technology, slanting the magnets compensates for them being to small

causing a loss of power. Make it right the first time, make it a RENEGADE.

 

 

 

 

 

 

1600 Watts plus potential power! -
  
Comes With:

• RENEGADE 2 PMA WITH 14 MAGNET ROTOR. 
• Mounting Bracket and Heavy Duty 2 arms tail assembly.
• Tail fin measures 9" wide x 28" tall for maximum tracking.
• The Missouri Wind logo is laser cut into the tail fin. 
• No slip rings to fail or replace. Wire tension system.
• Comes with 11 carbon fiber composite blades. 
• Aerodynamically tapered Genuine RAPTOR Blades for maximum output.
• Steel blade hub is 3/16'' thick x 9'' in diameter
• Blades Make  60 1/2" dia.  
• Mounting Bracket Fits on 1.5" schedule #40 or #80 pipe.
• 125,000 hours + of rated bearing life.
• RENEGADE PMA has no brushes, very dependable!  
• Heavy duty Hub spacer/stabilizer 
• 9 blade Turbine weighs 32 lbs.  
• 2 YEAR Limited  WARRANTY. 
  
• all of our wind turbines come with a hub

stabilizer, spacer shown below

  

 

EXTRA WIDE TAIL FOR THE BEST TRACKING AND INCREASED AIR FLOW

 MADE IN USA

ALL STEEL CONSTRUCTION 

 For 12 volt battery charging

CUSTOMER COMMENTS

Hello Jeff, I am very happy with my wind turbines my electric meter has not moved a bit since I put them up.

I have several neighbors that are very interested in them. I am sending them your way do to the price of them and

 the ease of putting them up. I will send you pictures of them up when I get a chance.

I will keep you informed on how they perform here in Michigan. Thanks for a great product. John Coles

 

SEE THE MISSOURI RAIDER 9 BLADE WIND TURBINE INSTALLED IN FRANCE

NOTICE THE AMP OUTPUT IN DIFFERENT WIND SPEEDS

 

Why 9 or 11 blades?
Because the RENEGADE SUPER PMA has a high amp
output. High amp output requires allot of torque so we designed the 9 and 11 blade system to do two things...
Have high torque and extreme low wind start up.
Once a gust of wind starts the blades turning, the mere weight of the hub and blades acts like a flywheel and just keeps turning as the wind speed slows.

Why high amps?
Amps are whats needed to charge batteries. The higher the amp output the quicker your batteries come up to a full charge.
Allot of companies are showing a PMA putting out 12 volts at real low rpms. What they are not showing you is any amp output at that low rpm.
12 volts and no amps = no charging. Their volt output is done under a no load condition, meaning not connected to a battery. This gives a misleading output.

The Missouri Raider Wind Turbine has an extra large tail fin for maximum tracking in the wind and increases air flow though the blades which increases the power output.
Our 9 blade hub is 8" in dia. x 3/16" thick, the hub is supported with our
hub spacer stabilizer. This keeps the hub from flexing or vibrating in high winds.

The Raider uses our genuine RAPTOR blades for the highest speed possible. Higher speed means greater output. All PMA's need high speed to generate any usable power,

high speed cannot be accomplished by aluminum blades with a large round pitch, wooden blades, or PVC blades.

All Missouri Wind Turbines are manufactured by Missouri Wind and Solar in
Missouri, USA and have the MW logo laser cut in the tail fin.
Our Genuine Raptor Blades all have "RAPTOR" in the base of the blade. IF it does not say RAPTOR, it is NOT a genuine Raptor blade made in Missouri.
We will not say they are made in Missouri, We will show you. See our factory video.

Blade start up is 7 mph. winds. Once started the wind can slow to 2 to 3 mph before blades stop turning.

 

 

 

This is our most powerful
Wind Turbine.

YOU ASKED US WHERE OUR WIND TURBINES HAVE BEEN INSTALLEDAND WE THOUGHT WE WOULD SHOW YOU.

The pictures below show a Suzlon wind turbine in Denmark with a Missouri Wind Turbine

mounted on top.Suzlon made it clear they needed dependable wind turbines to operate the beacons.

After months of testing they decided to go with a wind turbine built in the USA

by Missouri Wind And Solar.Notice the MW logo on the tail fin.

100% Manufactured in Seymour Missouri,The Show Me State!

OUR MISSOURI WIND TURBINES ARE TUFF ENOUGH FOR SUZLON,HOW ABOUT YOU?

 

INSIDE OUR STORE MISSOURI WIND AND SOLAR IN SEYMOUR,MISSOURI

A REAL STORE WITH REAL PEOPLE (NO BALL CAPS AND SUN GLASSES)

YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING

WE  ANSWER THE PHONE AND OUR EMAILS

     

 

 

We do not mark items as gifts or under report values for customs. For International buyers it is strongly recommended to check your own countries tax practices as we do not pay your taxes,duty or customs fees.

We do not over charge for shipping it is simply what the shipping calculator comes up with. Customs fees or taxes are not included in shipping,it is your responsibility to pay them.

 WIND TURBINE  WARRANTY

2 YEAR LIMITED WARRANTY  DOES NOT COVER ABUSE,NEGLECT  OR DAMAGE DUE TO TORNADOES, HURRICANES OR TOWER FAILURES OR OBJECTS BEING THROWN INTO TURBINE LIKE FLYING DEBRI, BRANCHES ETC.

DOES NOT COVER RUST AND CORROSION. ALL PARTS ARE COVERED FOR 2 YEARS FROM DATE OF PURCHASE FROM MANUFACTURE DEFECTS, BAD WORKMANSHIP AND FAULTY PARTS. DEFECTIVE PART MUST BE RETURNED AT THE OWNERS EXSPENSE TO US WITHIN 2 YEARS FROM DATE OF PURCHASE. ALL CLAIMS MUST BE ACCOMPANIED WITH ORIGINAL INVOICE. ALL INSTALLATIONS MUST BE DONE BY A QUALIFIED INSTALLER. WARRANTY DOES NOT COVER PERFORMANCE.

                                                BLADE WARRANTY

LIMITED LIFETIME WARRANTY

 

LIMITED TERMS FOR ALL RAPTOR GENERATION 4 WIND TURBINE BLADE WARRANTY
Guaranteed for a lifetime not to break under normal use

Cracked or broken blades will be replaced FOR FREE!
We only warranty blades if they break under normal use.
Our blades can last 75 years in the Sun (Lifetime)

We do not recommend using our Raptor Blades with any hub made less than the hubs recommended on our site.

Warranty does not apply due to a tower fall, over tightening of bolts

or striking debris from tornado or hurricanes, falling trees.

Warranty only applies when our blades are used with our blade hubs only. Buyer is responsible for shipping costs only.

All broken blades must be returned to Missouri Wind And Solar

for replacement with copy of purchase at owners expense. We will pay to return them back to you.