eBay

Proudly present Smartsprouter ® – probably, the most convenient individual sprouter  device for sprouting of seeds, beans and nuts

Smartsprouter

Created by a person for whom the daily portion of fresh sprouts became an essential part of the life, with taking into consideration the existing experience of different methods and constructions for sprouting, Smartsprouter® well designed until small details and will serve as the best choice for the people who had chosen live food and who has an active lifestyle with frequent traveling and staying a lot of time at work or outside of home.

Sprouting seeds, beans, grain & nuts is an unique natural food that brings to human health, invigorates and gives to us a living natural energy of germinating life. With Smartsprouter® you could get your daily portion of fresh sprouts for 1-2 persons easy, quickly and MOBILE! Does not mater where: at home, at office, even when you are on the way or traveling! 

Well thought-out construction considered even to small details keeps the sprouting process much more fast and easy than traditional way of sprouting using jars and gauze. The natural heat from germinating sprouts and elaborated system of air- channels of special size and location provide optimal conditions for sprouting: a permanent air ventilation of sprouts with necessary level of humidity. Therefore a higher quantity of seeds are being germinating more quickly and the sprouts become more fresh and healthy, without turning sour, fermentation or growing moldy owing to too high humidity and water content.


Main Features

Smartsprouter
  • Beside Smartsprouter® itself, no need any additional accessories for metering of portion of seeds, its rinsing, soaking and sprouting – all necessary parts are included;
  • There are no parts for separate storage: all parts are always in one place - on the sprouter – making it handy every time you need it;
  • You just need to rearrange the top and bottoms caps to convert the sprouter to mobile waterproof travel container, that you could put to bag safely and take with you to work or for traveling even with water inside;
  • With back-rearranging the top and bottoms caps you turn your sprouter again back to germination mode or sprouts' direct storage in refrigerator without using any other additional containers or vessels.

Data

In individual cardbordbox, with 6-languanges English/French/German/Italian/Russian/Ukrainian manual. Color: Olive-green/Yellow.

Material: Quality food grade plastic ABS and PS, silicon rubber (all materials are tested and non-BPA)

Number pieces in box:1

Packing size (WxBxH): 9,5x9,5x20,5 cm (3,74x3,74x8,07 in)

Volume: 0,57l (20fl oz.) Net weight: 315g (0,7 lb)


4 simple steps to your daily quick portion of the fresh sprouts:

Smartsprouter

Construction

Smartsprouter® consists of only 4 parts as shown on the picture below. There is no need to store any of them apart when opting between sprouter modes - all of them are fixed on the sprouter and always at hand.

Smartsprouter construction

  1. Outer can
  2. Internal transparent can with volume marks and bottom ventilating mesh
  3. Sealed flat cap with rubber anti-slip insert and silicon sealing
  4. Meshed cap with ventilating holes

The internal can is placed inside the outer can. There are special fins to keep it there in central position. Both sealed and meshed caps could be screwed both sides of the outer can – they are fully compatible one with one another and could be changed places when needed.

Opting between sprouter modes you should be careful to select exact cap on top of the outer can:

  • Meshed cap on top: germination or storage of the sprouts in a refrigerator;
  • Sealed flat cap on top: traveling mode.

Germination/Storage mode with
meshed cap on top

Germination/Storage mode with meshed cap on the top

In germination mode a mashed cap with holes is placed on top which allows sufficient air flow to travel from the top of the can directly to the bottom where soaked seeds are placed. These holes are specially designed to provide enough air flow for quick germination, yet not making the seeds too dry. Remember to use the same cap when ready sprouts are kept in refrigerator, because even there the sprouts continue to grow (not that intensive though) and require fresh air flow. Please note that during this mode you do not have to put the flat sealed cap away and store it somewhere else, simply fix it on the bottom of your sprouter  – this will not only make it hard losing it, but it will also protect your sprouter from accidental overturn if placed on the slippery surfaces.

Traveling  mode with 
sealed flat cap on top

Transporting mode with sealed flat cap on the top

Traveling mode allows you to take the sprouter with you anywhere you go, even with water inside. Whenever you feel the need to take the sprouter with you simply switch caps' places  – the sealed flat caps containing silicon sealing inside will turn your sprouter into convenient leak-proof container for your daily portion of sprouts. With sealed flat cap fixed on top you can safely put your sprouter into a bag and take it with you to work or while traveling. Just remember to put mashed cap onto the bottom side of the sprouter and you will not have to spend time searching for it later. Once you arrive the destination point simply change the caps – and your Smartsprouter will continue preparing your daily portion of the healthy food. Simple and quick!


Quality and Safety Certificates

We pay great attention to the quality and safety of our product and wish to give this assurance to our customers, therefore we passed all required procedures and testing to be sure that only selected and high grade materials are used in Smartsprouter® manufacturing. Below you will find a list of such documents.

Verification of Conformity to European Community Directive 2004/1935/EC

Verification of Conformity to European Community Directive 2004/1935/ECEuropean Community Directive 2004/1935/EC "Food Contact Materials" (Directive NO. 1935/2004/EC of European Parliament and of the Council from Oktober 27, 2004) is the main European Framework Regulation that lays down stipulations for materials and articles which are intended to come into contact with foodstuffs.

The articles intended to be sold on the territory of European Community should strictly correspond to the requirements of this directive.

In accordance with Directive 2004/1935/EC the production which is intended to come into contact with foodstuffs should meet the following requirements:

  • Need to be manufactured in compliance with good manufacturing practice and quality standards;
  • Must not content components that could endanger human health;
  • Shall not transfer their components into the food in quantities that could endanger human health;
  • Must not change change the composition of the food in an unacceptable way;
  • Must not deteriorate the taste, color and odor of foodstuffs;
  • The information about products, manuals, labels should be full and should not mislead the customers.

1935/2004/EC is one of the universal and common used standards in all the European Community countries. To the packing of those articles that successful passed all the required testing could be put the corresponding marking about the fact that "this article could be used for storage and cooking of foodstuffs" and a special sign that confirm the compliance of this product to the obligatory requirements of European Community Law for such kind of products.

Download this document in a separate window as PDF


Test Report 68.5.53.11.0471.01 from 31.12.2011

Test Report 68.5.53.11.0471.01 from 31.12.2011

Verification of Conformity to European Community Directive 2004/1935/EC was issued by competent international agency TEN-ONE SERVICES after successful testing of the sprouter in accordance with test report 68.5.53.11.0471.01 from 31.12.2011 that confirms the compliance of Smartsprouter to the requirements of the following European Community Standards:

EN1186-1:2002 (Materials and articles in contact with foodstuffs. Plastics. Guide to the selection of conditions and test methods for overall migration)

EN1186-2:2002 (Materials and articles in contact with foodstuffs. Plastics. Guide to the selection of conditions and test methods for overall migration)

EN1186-3:2002 (Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants by total immersion)

EN1186-14:2002 (Materials and articles in contact with foodstuffs. Plastics. Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol)

Here you could find the full text of this test report with detailed listing of all parameters and their values that were obtained during testing.

Download this document in a separate window as PDF

 

Certificate about State Registration in Federal service on customers' rights protection and human well-being surveillance of Russian Federation No.RU67CO01.019.E000721.01.12 from 27.01.2012

Certificate about State Registration in Federal service on customers' rights protection and human well-being surveillance of Russian Federation

This certificate is the highest official document that states approval of safety for articles which are intended to come into contact with foodstuffs in Russian Federation and being issued only in case the corresponding tests for non-transfer the components into the food in quantities that could endanger human health in accordance with national standards of Russian Federation were passed successfully.

This certificate and state registration is also valid for Belarus and Kazakhstan. It allows the production, distribution and using of Smartsprouter on the territory of Russian Federation, Belarus and Kazakhstan.

Download this document in a separate window...


Others

More features are described at www.smartsprouter.com

We provide worldwide post shipping by HongKong post or Russian post in 2-3 working days with tracking number (tracking available at http://app3.hongkongpost.com/CGI/mt/enquiry.jsp  or  http://www.russianpost.ru/tracking20/English.htm ), money back during first 2 weeks if not satisfied.

***** Please provide your contact telephone number by ordering - it helps us to deliver your order correct and in time ******

ATTENTION of shopkeepers all around the world: We are interested in cooperation and worldwide distribution of our Smartsprouter®. We are ready to supply directly from out factory in China (with different convenient option for international payment and delivery to your country) and offer interesting conditions for distributors worldwide.