SOUND DEVICES 788T
160GB HD / CL8 MIXER
Please ask any questions before
bidding
Sound Devices 788T and CL8 Mixer are in great condition. never been dropped,
never been rained on. Kept in portabrace bag for its whole life. 160gb hard
drive included. This is an amazing piece of equipment with 8 preamps,
multiple input and output configurations, multiple format recording and
configurable media matrix. Complete information here sound devices
website
Included in auction:
Sound Devices 788T Hard Drive
recorder w/160gb non-ssd hard drive CL8 MIXER Automobile Charger
The 788T: Portable, Eight Input, Twelve-Track Recorder with Time Code
The 788T and 788T-SSD are eight input, twelve-track digital audio recorders
designed for production sound. Its eight pristine analog inputs accept
microphone or line-level signals, provide 48 V phantom power, offer peak
limiters for microphone signals, and adjustable high-pass filters. For
additional flexibility, the 788T accommodates eight channels of balanced AES3
digital input and six channels of balanced analog line-level and AES3 digital
output. Support for AES42 digital microphones is also available.
788T Key Features
Routing and Tracks
Extensive routing flexibility allows recording of isolated inputs while
simultaneously recording mixed tracks. Inputs or track assignments can be sent
to analog and digital outputs.
Data Storage and Transfer
The 788T has three options for recording storage that can be used
simultaneously.
- Internal storage: 788T (160 GB SATA), 788T-SSD (160 GB Solid State Drive)
- CompactFlash cards with UDMA support
- External FireWire hard drive or DVD-RAM (with bus powering)
The 788T Recorders can be connected to Mac OS or Windows computers with USB
or FireWire 400/800 for high-speed data transfer.
788T Key Features List
- Eight mic/line inputs, each controlled with front panel, pop-out gain
controls
- 12-track recording, to record iso's, stereo mix track, and two-track aux,
Aux1, Aux2
- Each input has solo headphone monitoring, 48 V phantom, limiter, polarity
reverse, high-pass, and selectable delay
- Selectable sampling rate converters on each digital input
- Sampling rate selectable up to 96 kHz
- AES42 digital microphone support
- Backlit LCD display viewable in any environment
- 8 x 13-segment Peak/VU meters with arm LED
- Word clock in and out with tri-level video sync support
- Time code generator supports all data rates; holds time code for four hours
with no power sources attached
- Internal 160 GB, 2.5-inch SATA hard drive; 240 GB SSD in the 788T-SSD
- CompactFlash slot with UDMA support
- Powered by removable Li-ion rechargeable batteries
- External DC power input operates unit and charges Li-ion battery
- Back panel multi-pin connector for one-cable connection to digital mixing
board (AES input/output, power, switch closure in/out)
- FireWire 400/800 and USB 2.0 connections for ultra-fast file tranfer between
788T's CF and HDD to computer
- USB keyboard input for control
- Aluminum & stainless-steel chassis for exceptional durability and light
weight
- Designed for the same operational environmental extremes as Sound Devices
field mixers
788T Specifications
Digital System
Sampling Frequency
- Internal: 32, 44.1, 47.952, 48, 48.048, 88.2, 96, 96.096, 176.4 and 192 kHz
- External clocking: 32–96.096 kHz via word clock or digital inputs
Internal Data Path and Processing
- 32 bit, 192 dB dynamic range
A/D, D/A Converters
- 24 bit, 192 kHz sample rate maximum
A/D Dynamic Range
- 123 dB, A-weighted bandwidth
- 120 dB, 20 Hz–22 kHz bandwidth
D/A Dynamic Range
- 114 dB, A-weighted bandwidth
- 111 dB, 20 Hz–22 kHz bandwidth
Analog Audio
Frequency Res. Mic or Line
- 10 Hz–40 kHz, +0.1, -0.5 (gain controls centered, measured at 48
kHz)
THD + Noise
- Mic: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, -15 dBu input)
- Line: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, +16 dBu
input)
Gain (input dBu to -20 dBFS)
- Mic: Off (0) to 76.0 dB
- Line: Off, -26.0 to 50.0 dB
Input Impedance
- Mic (XLR and TA3): 3.3k ohm; Line (XLR and TA3): 3.3k ohm
Input Clipping Level
- Mic input: +8 dBu minimum (gain = 10 dB); line input: +26 dBu minimum (gain
= 0 dB)
Input Topology Mic and Line
- Fully electronically balanced, RF, ESD, short, and overload protected; pin-2
hot, pin-3 cold
Gain Matching Mic/Line inputs
- 0.1 dB increments, channel-to-channel while linked
Common Mode Rejection Ratio
- Mic: 40 dB minimum at 80 Hz
Metering
- 112-segment (8 x 14), sunlight-viewable, selectable peak, VU, or peak (with
or without peak hold) with VU ballistics, variable brightness
High-Pass Filters
- 40-320 Hz in 10Hz steps @ 6/12 dB/oct (Setup Menu selectable)
Mic Powering (Each analog input selectable)
- 48 V phantom through 6.8k resistors, 10 mA per mic available, menu-selected
per channel in mic or line level positions
Mic/Line Input Limiters
- Variable threshold -12 to -2 dBFS; Infinite:1 limiting ratio, 2 mS attack
time, menu-selectable release time 200-2000 mS, soft-knee starting approximately
6dB below setting.
Line Output Clipping Level
- +24 dBu minimum, 10k ohm load
Attenuation & Resolution
Output Topology Line
- Fully electronically-balanced, RF, ESD, short, and overload protected; pin-2
driven hot, pin-3 driven cold; let pin-3 float for unbalanced
connections.
I/O – Digital
- Balanced AES in 1-8 on DE15 connector 110 ohm, 2 V p-p, AES and S/PDIF
compatible with RCA adaptor, AES42 mode 1 compatible and provides 10 V to AES42
microphones
- AES3 Balanced AES out 1-4 on TA3 connector; Balanced AES out 5-6 on DE15
connector 110 ohm, 2 Vp-p, AES and S/PDIF compatible with RCA
adaptor
Digital Storage
- Internal hard drive SATA interface 2.5-in hard drive 4200–7200 RPM
supported, solid-state drive (SSD) support, FAT32 formatted, up to 2 TB
addressable
- CompactFlash CF type I, II, and + (microdrive) compatible, UDMA (300x)
compatible, FAT32 formatted, up to 2 TB addressable
File Types
- Record: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or
16-bit;
- Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit
or 16-bit;
- MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo; MP2 @ 64, 96, 128,
160, 192, 256, or 320, 384 kb/s stereo
Utilities
- Drive formatting and speed test for internal hard drive, CF and external
drive volumes
Data Transfer / Control
- FireWire 400: For connection to external drives and computers: IEEE-1394a
compliant, 6-pin FireWire, Windows 2000, XP, Vista, 7) Mac OS X only
- FireWire 800: For connection to external drives and computers: IEEE-1394b
compliant, 8-pin FireWire, Windows (2000, XP, Vista, 7), Mac OS X only
- USB 2.0: Slave mode only. For connection to Windows( 2000, XP, Vista,7) Mac
OS X only
- USB Keyboard Input: For connection to USB keyboards for entering notes and
controlling features and functions of the 788T via user selectable keyboard
shortcuts.
Time Code
- Modes Supported: Off, free run, record run, 24 hour run, external time code
receive, free run -auto output mute
- Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+
- Accuracy: 0.2 ppm, when tuned with Ambient Master Controller, holds TC clock
for 4 hours after main battery removal; after 4 hours, retains time of day
- Input / Output 20k ohm impedance, 0.3V p-p (–8 dBu) minimum / 1k ohm
impedance, 3.0V p-p (+12 dBu)
Word Source
- Internal Sync: internal word clock generator
- External Sync Input: Word Clock, AES3, or Video (NTSC, PAL, and Tri-Level)
- Word Clock Output: Square wave, running at sample rate, 3.3 V p-p, 75
ohm
Power
- Power supply (batteries): operating cell, removable 7.2 V (nominal) Sony
L-type Li-ion, operational from 6.5–8.5 V, time code battery, internal 3.6
Li–ion
- Power supply (external): 10–18 V, 1000 mA minimum, via locking 4-pin Hirose
connector, use Hirose #HR10-7P-4P (DigiKey# HR100-ND) for locking mating DC
connector; pin-1 (-), pin-4 (+).
Environmental
- Operation and Storage ambient temperature 5–55° C, relative humidity
(non-condensing) 80%
Other
- Tone Oscillator: 100 Hz–10 kHz, variable output, assigned to tracks or
outputs (menu-selectable), continuious or L-ident mode
Dimensions and Weight
- Size: 45 mm x 257 mm x 163 mm (H x W x D) 1.8" x 10.1" x 6.4"
- Mass: unpackaged: 1.7 kg, (3 lbs 12 oz.) without battery
http://www.sounddevices.com/products/788t/
|