Version 1. Never been used. Comes with 2 interchangeable top panels - one with optical drive cutout, one without.
Specifications
Dimensions (H x W x D): 240 x 160 x 328mm, 12.6L (250 x 160 x 338mm overall)
Motherboard support: Mini-ITX, Mini-DTX
Liquid cooling support: Single 120mm or 240mm slim radiator
Power Supply support: SFX, ATX (limited; see compatibility section)
Drives:
- 3 x 3.5" Mounts:
- 1 on case floor
- 2 in removable side bracket (cannot be used with dual radiator)
- 3 x 2.5" Mounts:
- 1 inside chassis front
- 1 behind front panel (in place of optical drive)
- 1 on case bottom (in place of 3.5" drive)
- Included double-stacking bracket allows 2 x 2.5" drives on one mount (depending on drive thickness)
Disc Drive: Slim slot-load optical drive bay
Fans:
- 4 120mm fan mounts
- 2 on side bracket
- 2 on case bottom (in place of 3.5" drive)
- 1 x 80/92mm fan mount (bottom)
- 1 x 80/92mm fan mount (rear)
Front ports: 2 x USB 3.0, HD Audio
Power button: Red/blue power/drive activity LED
Material: 1.5mm aluminum construction, anodized brushed exterior, painted interior
Compatibility
CPU Cooler
- Top-down coolers are recommended.
- Height restriction: 130mm
- Cooler cannot extend past the top of the board by more than 10mm.
For many larger coolers, this limits motherboard choice to those with
centrally-located sockets.
- Large coolers that extend past the front of the board will prevent the 3.5" HDD cage from being used.
Watercooling
- Sealed liquid coolers or integrated pump/block and radiator/res recommended.
- Single 120mm or 240mm radiators only.
- Thinner radiators only (under 40mm).
- Fans in push/pull are not recommended due to space constraints.
GPU
- Rear exhaust cards recommended.
- Max length: 12.5" (slots 1 & 2), 11" (slot 3)
- Max width:
- For cards up to 12.5" or cards in the third slot: 4.4"
- For cards up to 11.5" in the first or second slot: 5.5" (4.7" at the PCIe power connectors)
Power supply
- SFX PSU support is standard
- ATX PSU support is possible using the included bracket with the following limitations:
- Cannot be used with the dual 3.5" HDD cage or 240mm radiator
mounted to the side bracket (120mm radiator is still possible over the
motherboard area)
- Up to 160mm modular PSUs may be used with short GPUs (under 195mm long)
- To use an ATX PSU and GPU over 195mm, the PSU can not be longer than 140mm and must be non-modular (but this is not recommended unless shortening/removing excess cables)
- The AC inlet orientation on some ATX power supplies may prevent the angle plug from fitting, please check carefully. See this image. Note: the included AC cable has been changed from right-angle to left-angle for V2.