eBay

       

Handheld LCR Inductance Capacitance QZDR ESR DEG Meter Tester 1KHz USB TH2822

TH2822 series adopts the ultra-low dissipation design and high density SMD assembly techniques and can simultaneously display primary and secondary parameters by the use of backlit LCD display. The dual-color shells are gorgeously once shaped; functions are easy to operate. Gorgeously once shaped dual-color shells and easy operating functions are the characteristics of the meter. The test frequency is up to 1 KHz, the readings of primary parameter 40,000 counts and the resolution of dissipation factor 0.0,001. Accurate and convenient measurements of passive-components can be achieved in all occasions for a long time. With USB interface TH2822 series can conveniently make data communication and remote control with PC. In order to satisfy the increasing test requirements for SMD and balance the different needs for performance and price, two types of 4-terminal Kelvin test tweezers: TH26009C and TH26029C are available for users’ choice.

Feature:

TH2822TH2822ATH2822C
LCR Test ParameterMain parameters: L / C / R / Z; secondary parameters:D / Q / θ / ESR
Test Frequency100Hz,120Hz,1kHz100Hz,120Hz,1kHz,10kHz100Hz,120Hz,1kHz,10kHz,100kHz
Test Level0.6Vrms0.6Vrms0.6Vrms
Output Resistance100 Ω100 Ω100 Ω
Basic Accuracy0.25%0.25%0.25%
Measuring Speed4 meas/sec,1.5 meas/sec4 meas/sec,1.5 meas/sec4 meas/sec,1.5 meas/sec
Equivalent CircuitSeries and Parallel
Ranging ModeAuto and Hold
Calibration FunctionOpen and Short Sweep Zeroing
Comparator Function1%,5%,10%1%,5%,10%,20%1%,5%,10%,20%
InterfaceMini-USB(virtual serial port )
Measuring RangeC0.0pF ~20.000mF0.00pF ~20.000mF0.000pF ~20.000mF
L0.0uH ~ 1000.0H0.00uH ~ 1000.0H0.000uH ~ 1000.0H
D0.0000 ~ 9.9990.0000 ~ 9.9990.0000 ~ 9.999
Q0.0000 ~ 99990.0000 ~ 99990.0000 ~ 9999
θ(DEG)-180°~ +180°-180°~ +180°-180°~ +180°
Z/R0.0000 Ω ~ 10.000 MΩ0.0000 Ω ~ 10.000 MΩ0.0000 Ω ~ 10.000 MΩ
ESR0.0000 Ω ~ 999.9Ω0.0000 Ω ~ 999.9Ω0.0000 Ω ~ 999.9Ω
DisplayLCD Main/secondary parameters;
Main parameters 40000digits, secondary parameters D / Q / θ minimum resolution 0.0001
LCD Main/secondary parameters, backlight;
Main parameters 40000digits, secondary parameters D / Q / θ minimum resolution 0.0001
Measurement Terminals3, 5 Terminals
Power RequirementsIEC 6LR61, 9V alkaline batteryLH-200H7C, 8.4V Ni-MH 200mAH Battery
Operationg CurrentMax.: 28mA, 1KH: 25mA(100 OHM)
Standby CurrantMax.: 2μA

Note: The model number for this item is TH2822.