eBay

  •  
  • Description:
  •  
  • ● 3D Printer Controller RAMPS 1.4
  •  
  • The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

    • 3D Impresora Kit Mega2560 Control board A4988 Driver RAMPS 1.4 Para RepRap TE163

     

    Description:

     

    ● 3D Printer Controller RAMPS 1.4

     

    The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

     

    Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.

     

    ● Mega 2560 control board:


    the board is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.

    Microcontroller
     

    ATmega2560 Operating Voltage    5V

    Input Voltage (recommended)        7-12V

    Input Voltage (limits)                        6-20V

    Digital I/O Pins                                 54 (of which 15 provide PWM output)

    Analog Input Pins                             16

    DC Current per I/O Pin                     40 mA

    DC Current for 3.3V Pin                   50 mA

    Flash Memory                                   256 KB of which 8 KB used by bootloader

    SRAM                                                8 KB

    EEPROM                                          4 KB

    Clock Speed                                    16MHz

     

     

    ● A4988 driver module:


     A4988 Stepper Motor Driver Board is  a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
    Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
     
    ● Maximum output current is 1A
    ● Simple step and direction control interface
    ● Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
    ● Adjustable current control lets you set the maximum current output with a potentiometer,which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
    ● Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
    ● Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
    ● Short-to-ground and shorted-load protection

     

    Package included:

     

    ●  1x 3D Printer Controller RAMPS 1.4

    ●  1x Arduino-Compatible Mega 2560 R3

    ●  4x A4988 driver + Self-adhensive Heatsink

    ●  1x USB cable

     

     


    Item Specifics
    Marca - Sin marca -
    MPN No aplicable
    EAN No aplicable

    Payment

    We accept PayPal ONLY!

    Our customer service use only ebay email. Please avoid Paypal email as we do not look into it every day.

    VAT no.: 234210554

    Shipping

    Correct Address

     

    We ship only to Paypal Address. If you want us to ship to other address, please write it down in PayPal Note when you pay! Address

    variation request via email will not be accepted.

     

    Delivery Time

    We will ship your order within 2 Working Days upon Receiving Cleared Payment except Sunday and Public Holidays.

    Our standard delivery is without Tracking Number. For any reason if you are unavailable to accept the parcel, then the parcel will be

    held at your local Mail sorting office waiting for collection by you.

     

    No Combine Shipping

    Combine shipping is not available in general. We will only consider that if you purchase more than 10 pieces with each item less than

    50 grams because our postage cost is directly proportionate to the parcel weight on every gram. Please contact our customer service

    for wholesale arrangement if you are retailer or wholesaler.

     

    Local Tariff & Taxes

    If your country charge for any import tariff or taxes, it is your responsibility as a citizen to pay for it. We will not be liable if your country

    custom department detains your parcel.

    Returns

    ITEM MUST BE RETUNED WITHIN: 30 DAYS

     

    REFUND WILL BE GIVEN AS: Merchandise Credit

     

    If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and eBay fees, 

    although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy!

    We will make every attempt possible to resolve the issue if we made a mistake. 

    Please do not assume a mistake is intentional. Let us know if our service could be better!!!

    Customer Services

    Our customer service team works Monday to Friday from 9am to 6pm GMP+8. Please always talk to us via ebay email system.

    Store Cat.
     Store Home
     Other
    Hot Item
    Picture

    content_src_url
    3D Impresora Kit Mega2560 Control board A4988 Driver RAMPS 1.4 Para RepRap TE163

     

    Description:

     

    ● 3D Printer Controller RAMPS 1.4

     

    The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

     

    Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.

     

    ● Mega 2560 control board:


    the board is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.

    Microcontroller
     

    ATmega2560 Operating Voltage    5V

    Input Voltage (recommended)        7-12V

    Input Voltage (limits)                        6-20V

    Digital I/O Pins                                 54 (of which 15 provide PWM output)

    Analog Input Pins                             16

    DC Current per I/O Pin                     40 mA

    DC Current for 3.3V Pin                   50 mA

    Flash Memory                                   256 KB of which 8 KB used by bootloader

    SRAM                                                8 KB

    EEPROM                                          4 KB

    Clock Speed                                    16MHz

     

     

    ● A4988 driver module:


     A4988 Stepper Motor Driver Board is  a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
    Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
     
    ● Maximum output current is 1A
    ● Simple step and direction control interface
    ● Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
    ● Adjustable current control lets you set the maximum current output with a potentiometer,which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
    ● Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
    ● Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
    ● Short-to-ground and shorted-load protection

     

    Package included:

     

    ●  1x 3D Printer Controller RAMPS 1.4

    ●  1x Arduino-Compatible Mega 2560 R3

    ●  4x A4988 driver + Self-adhensive Heatsink

    ●  1x USB cable

     

     



    We accept PayPal ONLY!

    Our customer service use only ebay email. Please avoid Paypal email as we do not look into it every day.

    VAT no.: 234210554

    Correct Address

     

    We ship only to Paypal Address. If you want us to ship to other address, please write it down in PayPal Note when you pay! Address

    variation request via email will not be accepted.

     

    Delivery Time

    We will ship your order within 2 Working Days upon Receiving Cleared Payment except Sunday and Public Holidays.

    Our standard delivery is without Tracking Number. For any reason if you are unavailable to accept the parcel, then the parcel will be

    held at your local Mail sorting office waiting for collection by you.

     

    No Combine Shipping

    Combine shipping is not available in general. We will only consider that if you purchase more than 10 pieces with each item less than

    50 grams because our postage cost is directly proportionate to the parcel weight on every gram. Please contact our customer service

    for wholesale arrangement if you are retailer or wholesaler.

     

    Local Tariff & Taxes

    If your country charge for any import tariff or taxes, it is your responsibility as a citizen to pay for it. We will not be liable if your country

    custom department detains your parcel.

    ITEM MUST BE RETUNED WITHIN: 30 DAYS

     

    REFUND WILL BE GIVEN AS: Merchandise Credit

     

    If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and eBay fees, 

    although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy!

    We will make every attempt possible to resolve the issue if we made a mistake. 

    Please do not assume a mistake is intentional. Let us know if our service could be better!!!

    Our customer service team works Monday to Friday from 9am to 6pm GMP+8. Please always talk to us via ebay email system.


    Copyright of Welsky Technologies Limited. All rights reserved.

     

    El 12-jul-17 a las 11:03:53 H.Esp, el vendedor añadió los siguientes datos:

    DataCaciques