You are bidding on a Brand New

600W Small Grid Tie Power Inverter

for

Solar Panel System

 Wiring diagram for more than two inverters.

Feature:

1. This 600W micro grid tie inverter is designed specially for small power solar panel energy system.

2. This inverter can directly connect solar panel,through inverter to home grid.

3. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid.

Note: this inverter only has grid tie inverter function, do not have traditional inverter function, please do not connect with the battery and the solar panel at the same time, for further questions, please feel free to contact us.

Features MPPT (Maximum Power Point Tracking) allowing each solar panel to run at optimum output. 

Specifications:

Model	LT -600G
Normal AC Output Power	550W
Maximum AC Output Power	600W
AC Output Voltage	90V ~ 130V
AC Output Frequency Range	46Hz ~ 65Hz
Total Harmonic Distortion(THD)	<5%
Power Factor	0.99
DC Input Voltage Range (Optional )	10.8-30V
Peak Inverter Efficiency	92%
Standby Power consumption	<0.5W
Output Current Waveform	Pure Sine-wave
MPPT Function	Yes
Over Current Protection	Yes
Over Temperature Protection	Yes
Reverse Polarity Protection	Yes
Anti-Island Protection	Yes
Stackable	Yes

Mechanical Specifications:

Operating Temperature Range	-10 0C  ~  45 0C
Weight	3.5Kg
Dimension	332mm*265mm*135mm

Operation Procedures:

1, Connect the Solar Panel’s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel is 40W~600W.

2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket.

3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection”.

Installation:

The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid.

Plug and play stack as many as you need. 

SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV

to the grid, this will construct high-power grid-tie system

Works great for solar panel 600 watts and under....if you need wind grid tie inverter starter kit, please search "wind grid tie inverter" at our store or contact us. Thanks