- SHIP FROM USA
-
- Description:
-
- This list is a Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Top USA Distributor
USA 3D Printer Controller RAMPS 1.4 for REPRAP MENDEL PRUSA Arduino NEW
SHIP FROM USA
Description:
This list is a Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
This board is mostly based on Adrian's Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik's work with EasyDrivers. circuit design based mostly on Adrian's Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
Features:
•It has provisions for the cartesian robot and extruder.
•Expandable to control other accessories.
•3 mosfets for heater / fan outputs and 3 thermistor circuits.
•Fused at 5A for additional safety and component protection
•Heated bed control with additional 11A fuse
•Fits 5 Pololu stepper driver board
•Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
•I2C and SPI pins left available for future expansion.
•All the Mosfets are hooked into PWM pins for versatility.
•Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
•SD Card add on available -- Available now made by Kliment - Sdramps
•LEDs indicate when heater outputs on
•Option to connect 2 motors to Z for Prusa Mendel
•Size:11.5x6x3.5cm(approx)
Package List:
100% brand new and high quality
1x 3D Printer Controller Shield Board for RAMPS 1.4 Reprap Prusa Mendel
| Item Specifics |
| Brand : |
Unbranded/Generic |
| MPN : |
Does Not Apply |
| UPC : |
Does not apply |
We accept PayPal only. •Please understand that for variation listings, there is a drop down menu for you choosing the desired items. We are unable to change any content of your order based on the eBay checkout note or PayPal message. •Please verify your address during checkout . You may not be able to change the shipping address once the payment is completed due to the shipping status. •If you are paying through Paypal using eCheck, please note that your item can be shipped only after eCheck has cleared. We accept PayPal payment and all major credits through Paypal only. •To avoid an unpaid item dispute, all payments must be received within 7 days from the end of the auction.
We ship all the orders from USA For US orders, economy (est 5-10 days) shipping is FREE AND FREE tracking number
Returns: 30 DAYS FREE RETURN!
Contact Us: If you have any questions or concerns, you can reach us through eBay messages. We appreciate your business and if you are satisfied with our service, please provide positive feedback and rate the details of the transaction. Our goal is to make sure you are a satisfied buyer so please give us the chance to do so should anything go wrong with your order. Please contact us before leaving any negative or neutral feedback。
Shipping: We ship to your eBay registered address only. Items will be shipped within 24 hours when payment received. All items are shipped from our USA warehouse in NC, Shipping time only 2-7 business days with tracking number. We ship from US to US. Orders usually ship within 1 business day after payment is received.
|
|
USA 3D Printer Controller RAMPS 1.4 for REPRAP MENDEL PRUSA Arduino NEW
|
|
SHIP FROM USA
Description:
This list is a Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
This board is mostly based on Adrian's Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik's work with EasyDrivers. circuit design based mostly on Adrian's Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
Features:
•It has provisions for the cartesian robot and extruder.
•Expandable to control other accessories.
•3 mosfets for heater / fan outputs and 3 thermistor circuits.
•Fused at 5A for additional safety and component protection
•Heated bed control with additional 11A fuse
•Fits 5 Pololu stepper driver board
•Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
•I2C and SPI pins left available for future expansion.
•All the Mosfets are hooked into PWM pins for versatility.
•Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
•SD Card add on available -- Available now made by Kliment - Sdramps
•LEDs indicate when heater outputs on
•Option to connect 2 motors to Z for Prusa Mendel
•Size:11.5x6x3.5cm(approx)
Package List:
100% brand new and high quality
1x 3D Printer Controller Shield Board for RAMPS 1.4 Reprap Prusa Mendel
|
| Item Specifics |
| Brand : |
Unbranded/Generic |
| MPN : |
Does Not Apply |
We accept PayPal only. •Please understand that for variation listings, there is a drop down menu for you choosing the desired items. We are unable to change any content of your order based on the eBay checkout note or PayPal message. •Please verify your address during checkout . You may not be able to change the shipping address once the payment is completed due to the shipping status. •If you are paying through Paypal using eCheck, please note that your item can be shipped only after eCheck has cleared. We accept PayPal payment and all major credits through Paypal only. •To avoid an unpaid item dispute, all payments must be received within 7 days from the end of the auction.
We ship all the orders from USA For US orders, economy (est 5-10 days) shipping is FREE AND FREE tracking number
Returns: 30 DAYS FREE RETURN!
Contact Us: If you have any questions or concerns, you can reach us through eBay messages. We appreciate your business and if you are satisfied with our service, please provide positive feedback and rate the details of the transaction. Our goal is to make sure you are a satisfied buyer so please give us the chance to do so should anything go wrong with your order. Please contact us before leaving any negative or neutral feedback。
Shipping: We ship to your eBay registered address only. Items will be shipped within 24 hours when payment received. All items are shipped from our USA warehouse in NC, Shipping time only 2-7 business days with tracking number. We ship from US to US. Orders usually ship within 1 business day after payment is received.
Copyright of EZcart LLC. All rights reserved.
|
Powered by SoldEazy
|
